12" Mishimoto Slim Fan 65.00 shipped

[Esotericimage]

Used for 3-4 months.. After going boost i needed a bigger fan so the old one has to go. 65 Shipped.

When i was N/A it kept my water temp around 150-160, now the higher heat of turbo and being stopped in traffic in the hot Florida sun, Plus having a FMIC blocking the path, i went with a bigger fan.

Email me at Esotericimage@yahoo.com or text 786.216.5354

 

[Esotericimage]

 

[Esotericimage]

bump

 

[Esotericimage]

ttt

 

[civic96hb]

So will this connect with out any cutting of wires?

 

[Esotericimage]

If your using a stock fan, you need to cut off your terminal then run inline connectors. just 2 wires. Mishimoto makes these fans for universal use and does not put any terminals on the end.

Bump!

 

[Esotericimage]

bump

 

[Esotericimage]

 

[Billy.]

it bolts up to the radiator like a factory fan?

 

[Esotericimage]

No, you would use an intall kit from Mishimoto.com or u use zip ties thru the fins to secure it to the rad. OE rad fins are smaller than the dual core type like a Koyo, Mishi, etc... i would keep your stock fan if you are running a stock radiator.

Mishi makes a shroud to fit their rads which is what im going with.

 

[Esotericimage]

bump

 

[Esotericimage]

bump

 

[Esotericimage]

ttt