My right rear power window will roll down but not up. Motor and master switch have been replaced. I've noticed that when pressing the switch in the down position on the rear door, I hear the motor click (sounds like a relay engaging). This is with the window all the way down. When I do the same thing from the front (driver's) switch, I don't hear the click. Neither switch elicits any response in the up position.
The rear window switch connector has five wires. I'm not sure why a power window would require five wires, unless there's a feedback mechanism. The other windows do seem to know when they're all the way up...using the 'up' switch doesn't cause the motor to engage and groan temporarily like on other cars I've had. In any event, I'm hoping that someone can at least point me to a wiring schematic so I can trace this problem out.
Thanks!
The rear window switch connector has five wires. I'm not sure why a power window would require five wires, unless there's a feedback mechanism. The other windows do seem to know when they're all the way up...using the 'up' switch doesn't cause the motor to engage and groan temporarily like on other cars I've had. In any event, I'm hoping that someone can at least point me to a wiring schematic so I can trace this problem out.
Thanks!