96 ex rear door panel removal

[bpeters2]

I'm trying to remove the drivers rear door panel. I removed the screw by the door handle but can't find any other fasteners to remove. Can someone please help me with how to removed the panel, I need to figure out whats going on with a window that is stuck down ...or steer me towards a link..I've searched but can't find any instructions for removing a rear door. thanks!

 

[CO671]

edit: wait my bad you have an EX, lemme go look that up
edit2: should be the same

Pull off the arm rest, there's screws holding that in from behind the cover
lemme go take pictures to show you
edit:

 

[bpeters2]

Thanks co671, do you just pry the cover off the arm rest cover. I see the little locking tab on the forward part of the armrest but even with that tab pressed in it feels hard to pull the cover off....dont want to break any thing.

 

[CO671]

I just pinch and pull it off.. lol

 

[rover4x4]

There are a number of clips holding the panel to the door, you will inevitably break a few when you pull the panel off. Be sure you have also unplugged the power window switch if applicable.