Ek5yndro88
New Member
I have a 99 civic dx hb that has The dash and engine harness off of a 00 civic ex with a obd1 d16z6 in the bay running off a p28. After a lot wiring I got the car to start and got three codes 4, 10, and 41. My main concern is code 4 ckp crankshaft position sensor. I know the ckp sensor is built into the distributor but the thing is have a brand new dizzy and to troubleshoot I took the dizzy off of my brothers del sol which also has a stock z6 with a virgin p28 and has no engine codes what so ever and the ecu is still shooting code 4 The car won't rev past 4000 rpm. I've been doing research going to many sites and keep coming up with blanks. Any suggestions would be appreciated
