whats the best way to get the coilovers even on all four sides? any tips or suggestions?
crazydyke New Member 5+ Year Member 10+ Year Member Dec 19, 2004 #1 whats the best way to get the coilovers even on all four sides? any tips or suggestions?
CivicEX13 CC's Valve Cover Guy Registered VIP 5+ Year Member 10+ Year Member Dec 19, 2004 #2 measure how much thread is left over on each coilover and make it the same on each one is what i do
georgelb New Member Registered VIP 5+ Year Member 10+ Year Member Dec 22, 2004 #3 ^^^ that rarely works due to the weight distribution exerting a different load at each corner. Just use a tape measure from wheel centerline to the top of the fenders.
^^^ that rarely works due to the weight distribution exerting a different load at each corner. Just use a tape measure from wheel centerline to the top of the fenders.
Rubixcu7 Not Fittin In... Registered VIP 5+ Year Member 10+ Year Member Dec 23, 2004 #4 what i did was get them all the same height before i put em on, the back was easy but teh front was diff weights per side so a lil adjusting was needed...
what i did was get them all the same height before i put em on, the back was easy but teh front was diff weights per side so a lil adjusting was needed...