another rear disc swap question...needs to be done by saturday!!!

[CDubs]

ok i have done my research and came across these threads

http://honda-tech.com/showthread.php?t=641639
http://www.clubcivic.com/board/showthread.php?t=168067&highlight=rear+disc+swap

that have very good info,

***all the parts are on a totaled 94 integra LS with rear discs

found out on my 93 EX 2dr i can keep the prop valve (at least thats how i understand it) which is a 40/40 prop valve

my question is do i need to swap the master booster?

i know i need the rear set up including the trailing arms (LCA), lines, and ebrake cable

thank you so much for the responses, the shell is getting taken on saturday so i need to swap my drums into the integra just to get it rolling no need to hook them up since its going to be scraped after

 

[X-aCuTiOnA]

to get around for the time being, u should be ok.
i have stock EX prop (40/30 i think) with stock booster on CTR suspension and it works ok. just bleed the brake lines properly and u should be fine. it might be a little spongy but you'll stop so just be easy on the braking.

 

[Kensai]

You don't need to swap the booster

 

[CDubs]

so i can keep the prop valve?

 

[X-aCuTiOnA]

yea, 40/40 is what you want for a rear disk

 

[CDubs]

ok sounds good thanks guys