B16 swap

[Clean91 ef]

Hey guys I have a 91 covic hatchback d15 b1 with a 4 speed
Pedal assembly I'm swapping to a b16 like the WHOLE conversion from Japan but I had a question do I have to get a 5 speed pedal assembly or can I just use the same one I have. Please help!

 

[ReedMann]

If it has a gas, brake, and clutch pedal then you are good. You might need to do a cable to hydro conversion though, depending on the year of the motor.

 

[obracer12]

^ this

but for the year you could probably get a hold of all the necessary items from a DA for a cable transmission with the following codes:

J1/S1
Found in: Integra XSI/RSI (DA6) Civic sir (EF9) Crx sir (EF8)
Type: Cable
1st: 3.25
2nd: 2.052
3rd: 1.416
4th: 1.103
5th: 0.906
R: 3.000
FD: 4.400
[edit]A1/S1/YS1
Found in: 1990-93 USDM Integra LS/RS/GS (DA)
Type:cable
1st: 3.230
2nd: 1.901
3rd: 1.269
4th: 0.966
5th: 0.742
R: 3.000
FD: S1/YS1 4.266
FD: A1 4.400
[edit]Y1
Found in: CRX/Civic (optional LSD)
Type: Cable
1st: 3.166
2nd: 2.052
3rd: 1.416
4th: 1.102
5th: 0.870
R: 3.000
FD: 4.266
[edit]YS1
Found in: Integra 92-93 XSI/RSI (DA6, DA9)
Type: Cable
1st: 3.307
2nd: 2.999
3rd: 1.458
4th: 1.107
5th: 0.880
R: 3.000
FD: 4.400

 

[Mr.Baker]

Hey guys I have a 91 covic hatchback d15 b1 with a 4 speed
Pedal assembly I'm swapping to a b16 like the WHOLE conversion from Japan but I had a question do I have to get a 5 speed pedal assembly or can I just use the same one I have. Please help!

Pedal assemblies don't differ if you have a 4spd manual or 5spd.
You can use your current pedal assembly.