Clover Green '00 EK - UKDM

[E2-SAW]

Clover Green '00 EK - UKDM *UPDATED - Page 3*

hey people

just registered from sunny scotland so thought id post up some pics of my car

hope you like - leave comment and some suggestions of how it could be made better (oh, since the pics the centre caps have been colour coded also )

rest of the pics can be found here

http://icypix.co.uk/cars/SAW/index.htm

FULL SPEC LIST TO DATE!!!!

ENGINE & TRANSMISSION
B18C4 (1.8 16V DOHC VTEC) Engine Conversion (originally 1.4 SOHC 16V)
S9B Gearbox with LSD
4” Slash Cut Sounds of Silence CAT Back Exhaust
AEM Hybrid Cold Air Induction Kit
Skunk2 Intake Manifold
MFactory 4-2-1 Exhaust Manifold
High Flow Sports CAT
Buddyclub V-CON V-Tec Controller
B&M Short Shifter
Metal Oil Filler Cap
Colour Coded Rocker Cover
Green Reservoir Socks

PERFORMANCE
183.3bhp @ Flywheel before Exhaust manifold & High Flow CAT
Estimated 195bhp @ flywheel
14.922s @ 93.6mph 1/4 mile, Crail, April 29th 2007

SUSPENSION & BRAKES
K-Sport Coilover Kit with Springs Powder Coated Yellow
BLOX Anodised Gold Rear Lower Control Arms
MFactory Swaybar Kit, Powder Coated Yellow
EBC Grooved & Dimpled 282mm Discs from MG ZS 2.5 V6
EBC Green Stuff Pads
Twin-Pot Calipers from Honda Legend 3.0 V6, Painted Gold

EXTERIOR
Clover Green Pearlescent Paint
Spoon Style Front Lip
Plastic Grills Removed From Bumper and Meshed
EK9 Type-R Rear Lip
EK9 Type-R Grill
EK9 Type-R 2 Piece Spoiler with High Level Brake Light
Colour Coded
Custom EK9 Style Headlights, Painted Clover Green Inside
Smoked Side Repeaters
De-badged Tailgate & Shocker Stickers on Windows
Rear Wiper Removed
AEM Rear Number Plate Surround with Import Sized Number Plate
Honda Jazz Washer Jets

INTERIOR
Recaro Seats, Black Alcantara with Red Stitching, Taken from DC2 Integra Type-R
Black Alcantara Rear Bench with Red Stitching, Taken from DC2 Integra Type-R
White Reverse Indiglo Dials with Red Needles
Aluminium Dial Surround
Skunk2 Billet Gearknob

AUDIO
JVC KD-SHX751 EXAD Head Unit
Infinity 6x9’s
Pioneer 17cm Door Speakers

WHEELS & TYRES
16” Rota GT3 Alloys, Centres Painted Clover Green
Toyo T1S Tyres 195/45/16
Gold Anodised Lightweight Wheel Nuts
Metal Valves

STILL TO COME
Doors rerimmed (red)
New Floor carpet (red)
Safety Device Harnesses in red
B-C Summit Brace
New Steering Wheel (personal nardi)
Amber Front Fog Lights (will be on this weekend)
Rear Brake Disc Conversion
More Tuning (afer Christmas)

 

[Sundown]

Wow.

My suggestions: paint the headlight housings black or gray, extend the exhuast piping so your muffler isnt angled down and the sidemarkers would look better if they were amber..

4'' exhaust?

 

[WillyBigNut]

nice car dude. i've never seen color matched head light and wheels on the cgp, but it looks pretty cool. Only things i'm not feelin is the saggy muffler, the clear side markers, and the bumper mesh. Really nice car tho!

 

[daboyu978]

dunno bout the headlights but everything else is nice

 

[Hecz]

healights look bad ass color match to the rest of the car.... just like the fit.

 

[JohnS.]

Wow.... Impressive .

 

[Genuine Rolla]

i've been waiting for someone to color match their headlight housings...I think your car pulled it off nicely..!

looks freaking great bro. not a fan of the mesh on the lower grill but...other than that, I like it.

 

[Biohazard]

Sorry to day, I dont really like the color matching wheels. But other than those :

 

[CivicEX13]

looks nice not sure if i m digging everything color matched and might want to line your lip up better so it sits more level with the ground and not so angled weird on the bumper

 

[EK|B]

Wow very clean, if anything, I'd take out the grille in the front bumper.

 

[hkt03]

thats slick.. i always wanted to color match my headlamps fbp but never went through with it.

i love how your cars color matched like that, looks great

 

[E2-SAW]

thanks for the comments folks!!

yea the cars either a hit or a miss with alot of parts - mainly the colour codedness in the likes of the wheels and the headlights. it looks alot better in the metal as alot of people over here have said.

most of the work has been carried out by myself and my father. he's a painter/powder coater to trade which helps alot

the exhaust was initially made without the rear lip attached. once the rear lip was added, all we done was have the hangers extended, that'll be why its saggy

thanks for the comments - im focusing on having the interior finished before october, then saving for some engine tuning

 

[denracho]

man your cars nice... i love the green theme

 

[99EBPSi]

Clean.

 

[VTi_ME]

Nice

 

[cgpEJ6]

looks good, get some OEM foglights and new rims

 

[JDMJNKY]

Nice, but I feel green has been excessively used...lol

 

[James_spec]

its so green

 

[E2-SAW]

looks good, get some OEM foglights and new rims

have a quick look at the spec list, very bottom, future plans

should have the oem amber fogs in by the weekend - iv also got 15" OEM Enkei rims which i use sometimes also - these were also done in the same colour as the car

gonna have these powdercoated a funny colour, maybe yellow like the rear swaybar

heres how they looked on the car

 

[Suanico]

love the car minus the decals and that spoiler, and thats a little to much green for me