**CTR FULL SWAP 1.8L bored with Toda,Spoon Also FS: SMS header, toda flywheel,Spoon

[rhdek4]

Well I am selling the engine that i was building because im going a different route. I have bought this engine from Sun's auto and have had it for about 6 months, ran perfectly. I recently took it apart and began building it.Was built by a Honda tech in san antonio. Is bored with oversized ctr pistons and stroked to 1.8l with the itr crank. I am including the harness, mounts, ecu, and axles. here is my car with the engine
The breakdown http://www.onlineshowoff.com/user.asp?id=9616VID4P10GP81UV6K13697

b16b longblock w/ ctr lsd tranny ....$3850
Ctr oversized pistons and rings.......$299
Toda Spec b cams.......................$980
Toda cam gears ..........................$300
Toda valvesprings .......................$360
Crower TI retainers .....................$166
Spoon Valve cover Signed by spoon pres. $250
ITR crank ...................................$200
Gsr rods .....................................$150
Labor and ALL gaskets replaced straight from honda $2200
That totals up to be $8755
ASKING PRICE $5100

**Contact Roy Cell 512-563-4681 Located in austin Texas
Email h23luderm@yahoo.com

Also have a Mines ecu that goes great with this engine
6k vtec engage no redline no speed limiter $175 firm

Sms Race Header made for 1.8l and deletes the cat $630 firm *sold
Spoon High tension wires $175
Spoon radiator hoses $190 *sold
Toda Flywheel $290 *sold
Cusco catch can $65
Power enterprise timing belt $120 *sold

SMS header

My engine bay

Itr crank

Oversized pistons and rings

Ctr Block freshly bored

Arp headbolts, Crank, Toda Spec B's, cam gears and valvesprings

Toda flywheel

Cusco Catch Can

MORE PICTURES TO COME.

 

[J32a2OwnsU]

Wow nice setup....

5.1k though? yikes.

 

[rhdek4]

Obo, know their are alot of low ballers, and im willing to bargain.

 

[LatinEM2]

How much for the catch can shipped to az.?? is it complete??

 

[rhdek4]

come with everything pictured, also have a clear hose pipe that i bought from home depot that fits it. Can ship for $70.

 

[rhdek4]

Spoon valve cover signed by spoon pres, bought off of honda-tech. Cut for camgears too.

Spoon wires!

 

[FRODO]

man that is a dream motor for me...to bad i have k now, good luck with the sale.

 

[Shogun]

Wow, amazing motor.

good luck with the sale

 

[green]

pmd.

 

[rhdek4]

Fluidyne radiator, slim fan, spoon hoses,spon rad cap
All in good condition, normal wear. Everything pictured for $400 all **SOLD
*Can sell seperately if needed*

Tranny is sold, SELLING LONGBLOCK for $3500 with stock valve cover.

 

[Jspec Ej6]

Bump for j00!!!

 

[xdr3amx]

here is my car with the engine http://www.onlineshowoff.com/u...13697

link doesn't work also didn't you have a turbo b18c1 in your car when you bougth it or am i mistaking you for someone else?

 

[rhdek4]

no turbo for me, i imported my car link fixed http://www.onlineshowoff.com/user.asp?id=9616VID4P10GP81UV6K13697

 

[rhdek4]

may part the head and sell the shortblock just a heads up!

 

[GDMFeRiO]

and what hapen with the shell let me know is it for sell

 

[rhdek4]

Droping k20a in shell.


Block $1700
Ctr block new gaskets, new bearings, micropolished itr crank new ctr oversized pistons, freshly bored, 0 miles
Head 1700
ctr head, toda spec b cams, toda camgears, toda valvesprings, crower ti retainers

 

[gunmetalhatch]

Do u still have the toda spec b's? springs and gears? If so will u trade me> i have a 2005 k20z1 type s block bored to 87mm with stock crank, and eagle h beam rods.
pm me please