Custom Gauges?

[hondatunerz2002]

hey i just had a quick question, i now that i can for sure fabricate 94 GSR gauge cluster to fit in my 2000 Civic cluster but im not sure on , about the 92-95 civic Cluster can it be done? i wanted to swap it for these gauges

http://rds.yahoo.com/_ylt=A0Je5x8074xE1xgA9cyjzbkF;_ylu=X3oDMTA4NDgyNWN0BHNlYwNwcm9m/SIG=12c75a6sc/EXP=1150173364/**http://www.jdmplace.com/Images/Products/JDMEG6-gauge.jpg
anybody ever tried this? or attempt? any help it appreciated - thanks

or you guys think the GSR cluster is better?

http://rds.yahoo.com/_ylt=A0Je5wvk7oxEI04BpuCjzbkF;_ylu=X3oDMTA4NDgyNWN0BHNlYwNwcm9m/SIG=12h5mq1rk/EXP=1150173284/**http://www.thezcr.com/gallery/data/500/medium/860DSC00481.JPG

--thanks again ttyl

-Anthony-

 

[Evan.]

here ya go... GSR cluster into EG:

http://honda-tech.com/zerothread?id=437408- GSR Cluster into EG
http://honda-tech.com/zerothread?id=504396- GSR Cluster into EG
http://honda-tech.com/zerothread?id=304752- GSR Cluster into EG
http://honda-tech.com/zerothread?id=364837- GSR Cluster into EG

Id recommend the gsr cluster

 

[Rayden]

Personally I like the Si gauge Cluster. Its the one Im planning on replacing mine with

 

[forcdincivic]

Could you put the Si Gauges on a 99 civic ex coupe? Those models are the same as the Si right? (obviously with a different engine, but i mean accessory wise?)

 

[Evan.]

Could you put the Si Gauges on a 99 civic ex coupe? Those models are the same as the Si right? (obviously with a different engine, but i mean accessory wise?)

Any 96-00 cluster is plug and play with any 96-00 cluster. Example, you can put an si cluster in an ex car.

 

[got traction]

how hard is it to put a gsr in a ex?

 

[dank24]

here is a pic of my gsr cluster in my 99 ek. If you have the diagram and if you can read it, it's not hard at all. Just follow the directions.

http://img108.imageshack.us/my.php?image=cluster3ma.jpg

 

[wannabe]

hey i just had a quick question, i now that i can for sure fabricate 94 GSR gauge cluster to fit in my 2000 Civic cluster but im not sure on , about the 92-95 civic Cluster can it be done? i wanted to swap it for these gauges

anybody ever tried this? or attempt? any help it appreciated - thanks

or you guys think the GSR cluster is better?

--thanks again ttyl

-Anthony-

hmmm... i think he wants to put the EG gauges into his 2000 civic

 

[bmoua]

get a Sir, Sir (can),Si,CTR cluster bro...there way cleaner...i like the DC clusters too but they dont look as clean...

 

[hondatunerz2002]

yea i really do want to put the EG gauges in my Civic(the EG gausges looks million times better then the GSR gauges) but im not sure if it can be done i mean i can try i just dont want to f*ck up anything do you think it can be custom fabrcated to fit? or you think i should just not do it and go with The GSR cluster? >` hard decision? thanks for all the help out guys -later

-Anthony-

 

[wannabe]

yeah you can probably do it. your gonna need pin-out diagrams for both the EK harness and the EG harness and rewire it to match. i think i read somewhere they use different plugs tho. so you might have to cut and splice your harness to the EG plug.

 

[Rayden]

My Friend Has a 00 Si Cluster in his 99. He put installed it in about 40 minutes. It was completely "plug and play" The harness fits perfectly

 

[Rayden]

I was also wondering..if you got one..More than likely it wont have the same milage, but is there anyway you can adjust it??

 

[Evan.]

yes, its illegal though (overall), http://honda-tech.com/zerothread?id=413826

 

[hondatunerz2002]

oh i see, do you think it would be worth all the cutting of the wires etc. or just to put in a GSR cluster?
adjusting your odometer is illegal ? even if you get a new Cluster?
Actually im kinda leaning more towards the GSR cluster cause i actually would no how to do it rather then the EG cluster which sounds like theres a lot- of cutting and custom things to do to it... but we'll see ill let you now later--
-