does anyone have this?

[JDM melbatoast]

Is anyone out there running the x brace from Nesuspeed?


It looks like this

http://neuspeed.com/data/images/45.20.68.jpg

Let me know if you are I have some questions.

Thanks

 

[jonathan2006]

where does that go?

 

[JDM melbatoast]

under neath the engine and tranny connect the control arms together to tigthen up handling

 

[EMIIspecED]

i want one if that's any help

 

[JDM melbatoast]

well im goignt o try and build one i have access to everythign i need minus the measurements of it and what bolts at actually bolts on to under the car. help me find th emeasruements and ill make you one too.

 

[joe7987]

I'd like one... but my ground clearance sucks already =o(

 

[Snorism]

sounds good bro, good luck to ya!

 

[02EXSILVER]

I do.... I call it my pothole finder.

It uses the four bolts that mount the u shaped frame under your car.

 

[jonathan2006]

ill take one.

 

[JDM melbatoast]

I do.... I call it my pothole finder.

It uses the four bolts that mount the u shaped frame under your car.

can i get a picture of the bottom of your war with it on and a few measurements from you?

 

[Chris.]

ive got one but not installed yet. what measurments you need?

 

[JDM melbatoast]

ill draw soemthign upnow at work and pm you the second i get home thanks alot man

its for an em2 chassis correct?

 

[Chris.]

yea EM2 coupe 2002

 

[JDM melbatoast]

heres the measurements i need thanks alot once again man just shoot the measurements to my email bmork@niu.edu





all the measurements are taken from the center of the eyelets on the end of each shaft

 

[Pineapples]

If your car is lowered, you should forget about it.

 

[JDM melbatoast]

its not lowered im not messing witht he geometry of our cars there too touchy

 

[02EXSILVER]

I'll try to get you a pict by thurs night. It's been a rough week so far. What are you mesuring for?

 

[JDM melbatoast]

im building my own based off of the neuspeed brace and maybe using some of the tanabe brace as well. to be honest it doesnt look that hard to build. when you mounted yours on your car once you took the bolts out on the control arms did anythign shift? it seems liek those bolts hold a lot of s**t together and if you remove all four something might move?

 

[Chris.]

ill get them measurments here in a few min....they aint gonna be perfect...as im using a tape measure.

 

[JDM melbatoast]

u da man thanks alot dude