Drop in Turbo on stock D16

[wilseansonCAI]

Just wondering if it is possible to drop in a turbo without changing any of the internals.
Thanks
Sean

 

[Sleeper]

You need to do more the "drop" in a turbo. But stock internals will safe up 250-260ish whp. At that point it would be in ones best intrest to upgrade internals

 

[wilseansonCAI]

but if i ran like 4-8 psi i'd be alright?

 

[highneo]

you're going to blow the welds on the intake.

 

[wannabe]

but if i ran like 4-8 psi i'd be alright?

yesh you'll be fine i have seen a stock d run 10psi all day long

 

[Sleeper]

yesh you'll be fine i have seen a stock d run 10psi all day long

Boost pressure is erllivent 10psi on a stock D from an GT35R would pop that bastard & 10psi from an 14b would be a walk in the park.

It all by tune & amount of breaking power. & for a D16 that would be 250ish

 

[whtcivic93]

you're going to blow the welds on the intake.

Post useful information or dont post at all. This is not off-topic. You've been issued an Infraction.

Boost pressure is erllivent 10psi on a stock D from an GT35R would pop that bastard & 10psi from an 14b would be a walk in the park.

It all by tune & amount of breaking power. & for a D16 that would be 250ish

/thread.

 

[wilseansonCAI]

well when i put in the turbo i'd be putting in the manifold, all the piping and intercooler and everything else needed. I was looking at the Greddy drop in kit for it.

 

[BRAK54]

depends of the size of the turbo

 

[Silver Bullet]

Post useful information or dont post at all. This is not off-topic. You've been issued an Infraction.





/thread.

fag



it all depends on the tune bro....and i hope u dont get to much boost happy...cause than boom