ally138
New Member
So I've got a b16b sitting in a rusty ej9 with all the goodies. and an ek9 with nothing inside. I'm sure you get the idea lol. any pics to come... (pasting some of these bits from another forum so some of it won't make sense lol)
Other pointless updates:
So you got a rear disc conversion, well that's real cute
where shall I put these?
..
the car cover blew off due to typical strong scottish winds so then shoved it in the garage (excuse the bike)
And an update from the Donor car:
Varis Racing Concept Bonnet (super light)
Spoon leads fitted along with a recent oil and fuel filter change
and finally a regular oil check. good as gold
Got a bit bored, so i fitted the CP035s on the EJ9. It's a good indication of how the EK9 should look when finished but without the rust on the arches and paintwork lol. Still deciding on what black, but plenty of time for that!
Slowly getting parts together. Rear bumper and lip in, now waiting on EK9 headlights and front bumper and lip..
cp decals, new slim boss, wheel nut & rear pads
having the rear interior back in for the time being, so got myself rear plastics and dc2 seats
Life & Death
and ej9 dying to be reshelled
OEM EK9 Grille - GOT
OEM EK9 Headlights - GOT
OEM EK9 Front Bumper with lip - GOT
OEM EK9 Rear Bumper with lip - GOT
OEM EK9 Wing Mirrors - GOT
Am I missing anything else?
not much of a revival update but got bits and bob in for the ej9. Just having new rubber, transmittion and chassis stiffening bits to stick on the car by my mechanic.
- rear arb
- oem front strut
- carbing tie bar
- oem dc2 clutch
- Mfactory Flywheel
- Mfactory shifter & bushings
- rear green stuff pads
- Baffled sump
- SPC rear camber
all i can think of atm...
and in the future..
so, will see how i get on with this then after track day.. saving begins properly for the reshell/respray
In regards to the respray, quite liking that amethyst black pearl (one being broke atm) but do want something different like the scooby obsidian black...
that's the story so far...
Other pointless updates:
So you got a rear disc conversion, well that's real cute
where shall I put these?
..
the car cover blew off due to typical strong scottish winds so then shoved it in the garage (excuse the bike)
And an update from the Donor car:
Varis Racing Concept Bonnet (super light)
Spoon leads fitted along with a recent oil and fuel filter change
and finally a regular oil check. good as gold
Got a bit bored, so i fitted the CP035s on the EJ9. It's a good indication of how the EK9 should look when finished but without the rust on the arches and paintwork lol. Still deciding on what black, but plenty of time for that!
Slowly getting parts together. Rear bumper and lip in, now waiting on EK9 headlights and front bumper and lip..
cp decals, new slim boss, wheel nut & rear pads
having the rear interior back in for the time being, so got myself rear plastics and dc2 seats
Life & Death
and ej9 dying to be reshelled
OEM EK9 Grille - GOT
OEM EK9 Headlights - GOT
OEM EK9 Front Bumper with lip - GOT
OEM EK9 Rear Bumper with lip - GOT
OEM EK9 Wing Mirrors - GOT
Am I missing anything else?
not much of a revival update but got bits and bob in for the ej9. Just having new rubber, transmittion and chassis stiffening bits to stick on the car by my mechanic.
- rear arb
- oem front strut
- carbing tie bar
- oem dc2 clutch
- Mfactory Flywheel
- Mfactory shifter & bushings
- rear green stuff pads
- Baffled sump
- SPC rear camber
all i can think of atm...
and in the future..
so, will see how i get on with this then after track day.. saving begins properly for the reshell/respray
In regards to the respray, quite liking that amethyst black pearl (one being broke atm) but do want something different like the scooby obsidian black...
that's the story so far...