1. New Forum Software:
    We have finally upgraded the forum software due to it being so outdated. If you are having any issues with new forum please let us know. Please post any issues in this thread http://www.clubcivic.com/forum/threads/clubcivic-com-forum-upgrade.227221/

EVAP Bypass Solenoid

Discussion in 'Engine Tech / Drivetrain' started by Anderson413, Sep 17, 2011.



Welcome to ClubCivic a Honda Civic Forum

Club Civic is an online Honda Civic forum and community for all Honda Civic enthusiasts. Whether you own a Honda Civic Si, Ex, Type R, Dx, Lx, Cx, Dx, Vx, or even a hybrid you will find valuable information and honda civic car parts on this site. Take a look around to view Honda Civic discussion; including a photo gallery, maintenance information, tech tips, as well as ways to get better performance from your Honda Civic. Visit the Members Ride's to view and rate other member’s Honda Civics. Click here to start viewing the Honda Civic Forums. Before you start posting on this site you will need to register. If you are already registered and not logged in, please login here.

Browse the forums by generation by clicking below or browse all honda civic forums.


  1. Anderson413

    Anderson413 New Member

    Joined:
    Sep 16, 2011
    Messages:
    10
    Location:
    Canada
    Greetings.

    I'm curious as to when the EVAP Bypass does. And what is the symptoms my car would have is the small line attached to it was cracked. (Misfires?)
     
    Last edited: Sep 17, 2011
  2. Anderson413

    Anderson413 New Member

    Joined:
    Sep 16, 2011
    Messages:
    10
    Location:
    Canada
    Okay. So I got a used gas tank to replace my rusted out one. And I figured out where the leak was coming from. The 2 way valve.

    My question is now that my valve is leaking, and this valve also has a bypass solenoid on it. with a wire harness. The used gas tank had a 2 way valve. But that was it. No bypass, no harness. Can I just put in the 2 way valve from the used tank into my car. I'm sure I'll get the CEL light for EVAP. but if I know the valve works..whats the real harm? I really don't want to pay $50 for a new vlave and all the hardware cause it's rusted/falling part bad.

    I might have this car running tonight/tomorrow if someone replies soon! I'm excited this is almost done.
     


Share This Page