flex pipe for exhuast?

[jon julian]

ok so lets say you have a GSR 4-1 header JDM style...(shorter style header) with a test pipe resonator.....were the hell can you put a flex pipe with no room for one?

anyone have any ideas?

 

[Billy.]

cut the flanges off the test pipe and weld them to the flexpipe keeping it the same length as the testpipe

 

[YoungKadafi]

if you get the right ID/OD of the pipes you could grab a slip fit flex pipe and just cut it to spec. I did this on my R and it works perfectly. No more warping manifolds