Green 91's CRX

[Steven.]

Check last page, and pages before last for current updates​

offical, any parts i buy, modifications i do will be posted here.

coments welcome but please keep it to comments or suggestions.

Rough List of plans.

Current State
Car: 91 CRX DX ED8.
Engine: None
Tranny: None
Suspesion: cheap-o coilovers
Interior: Stock for now, No seats.

Plans
Engine/Drive Train:
-OBD1 DOHC ZC*
-SI tranny with LSD
-upgrade axles
-HKS Head Gasket
-Hondata Style Intake Gasket
-6 puck Clutch
-ACT street lite flywheel
-JGE Valve springs/cromoly retainers
-JGE 1001 Camsahfts
-Supertech black nitrate valves
-Probe I-beam rods
-Endyn pistons
-ARP Head Studs*
-ARP Pressure Plate bolts
-ARP Flywheel bolts
-550CC injectors
-P29 ECU*
-Megasquirt ECU
-custom mini ram turbo manifol
-GT3076r turbo
-God Speed Black intercooler
-3" DP & Exhaust
-JGS 40mm wastegate
-JGS precision Bypass valve*
-JGE Adj. Cam Gears*
-Alum. Half Rad.
-OEM GSR Dual Bend Shifter*
-Wideband Oxygen Sensor

Suspension/Brakes:
-Ex sedan Front 10.3" Brakes*
-CRX SI Rear Disk
-Stainless Steel Brake Lines
-Full Bushing Upgrade
-ASR 32mm hollow sway bar setup
-Home made Traction system
-F&F Type I full coilovers or PIC apex coilovers
-PIC RR rear control arms
-Integra Booster and MC*
-Camber Kits

Interior:
-Stock SI wheel
-6pt Roll Cage
-Roll cage Camera Mount
-corbeau clubman drive seat
-Mint CRX SI pass seat
-Various Gauges(boost*, EGT, Oil Press.)
-Center Vent gauge mount
-SI cluster

Exterior:
-EF Side markers
-Amber Corner Lenses
-UK 1.6i-16 OEM decal



shotting for a min. of 250whp.

Notes:
*=Bought/Recived

 

[Steven.]

most of the parts will be swapped over from the hatchback.
exhaust, front brakes.
i have the distributor and ECU in my room, along with teh waste gate.

 

[Chris.]

offical, any parts i buy, modifications i do will be posted here.

coments welcome but please keep it to comments or suggestions.

SO far:
1. XS power External Waste Gate
2. P29 (OBD1) ECU, wating to be chipped
3. OBD1 DOHC ZC Dissy
4. 3' cat-back
5.ZC Intermediate Shaft
6.EX front Brakes

parts needed:
HUGE f**kin LIST
1. Engine(OBD1 DOHC ZC)
2. 91 DX CRX engien bar harnnes
3. Seats
4. OBD1 conversion harnnes
5. traction bar
6. Turbo manifold( commin soon, Log mani)
7. Intercooler and piping.
8. 15X8 rims
9. full suspension upgrade
10. new batt relocation
many parts needed.

goddamn dude!!!! 3 feet???? holy s**t!

 

[Shiznit]

have you taken a look at the diaphram of the xs power gate? whats the quality like?

 

[96 DX Hatch]

Can't wait for the build & some pics

I guess in a few weeks I'll have to start my CRX-build thread

 

[Chris.]

have you taken a look at the diaphram of the xs power gate? whats the quality like?

the diaphram is a rubber type. ill get him to get pics today..

 

[ryan89crx]

be careful putting the WG back together!! its very easy to get the diaphram pinched between the 2 housings. it may look like its kosher, but make sure you keep checking it as you are gradually tightening it all back down

 

[Steven.]

EX Front Brakes, 10.3" rotors

ZC Int. shaft

JG Cam gears(now with black botls and Nord lock washers

home made 3" cat back(made on the hatch, being modified to fit the CRX

P29 OBD1 DOHC ZC ECU

Wastegate and spare spring

Best book evar

happy now, most of this stuff you have seen already

 

[Steven.]

be careful putting the WG back together!! its very easy to get the diaphram pinched between the 2 housings. it may look like its kosher, but make sure you keep checking it as you are gradually tightening it all back down

werd, when we changed the spring in the other one we had, it was a b***h not to pinch it, but we got it in no problems

 

[91SiVTEC]

Nice! and what numbers are you shooting for?!

 

[Steven.]

230whp, but ill probably over shoot it.

 

[DEEGORILLA06]

230whp, but ill probably over shoot it.

I think u should aim for higher if you want to atleast be side to side with a b-series swap rex...








edit:or a k-series swap ed hummmm......shhhhhhhhhhhhhhh

 

[Steven.]

ive beat B16 swapped CRX with my stock ZC lol.

i always aim low., who said i was going to street race, i dont support street racing.

 

[Hecz]

oooo e boi, rock that s**t!

 

[DEEGORILLA06]

ive beat B16 swapped CRX with my stock ZC lol.

i always aim low., who said i was going to street race, i dont support street racing.

b16 to me is a joke.i mean b18 series.but any how,i never mentioned street racing.ive seen the pic's with you racing ur skittles in the track.i hope u could keep up to me..

 

[Steven.]

so a 20psi boosted DOHC ZC wont?
liek i said, the 250hp goal should be over shot, if it is good, if not, fine.
just want something fun to drive.

plus ive beat LS integras with the ZC, ZC pwns

 

[Steven.]

Commin soon(ordering monday)

should look better then that one though

 

[DEEGORILLA06]

so a 20psi boosted DOHC ZC wont?
liek i said, the 250hp goal should be over shot, if it is good, if not, fine.
just want something fun to drive.

plus ive beat LS integras with the ZC, ZC pwns

the only reason i have faith on your car being fast is not do to the dohc zc its because your swaping it to a rex.i have tons of respect to swapped out rex's...

 

[91b18hatch]

I have been waiting for this thread since I saw the rex! Will be fun to see how everything goes

 

[Steven.]

i wil update this thread with each part i get, and anythign i do to the car( wont be much till June).

i would make it a sticky, but to many people b***h becouse, "why cant my build thread be a sticky?"