gsr swap into ek wont start???

[slod16]

i just swapped a gsr into my ek coupe and i am not getting any spark
1.i used my stock ex harness in i had to extend a couple wires in there is a couple plugs that is on my ex but not motor like 3
2.im using a obd2 to obd1 conversion harness
3.it has a stupid msd dizzy and like a little thing that says blaster on it
any one have a clue as to what could be the cause anything will help anyone have this problem when using there ex harness?

 

[slod16]

bump need help asap

 

[/OO==[][]==OO\]

what ecu are you using?

i am sure it is a problem with your distributor.

 

[fwdpower]

Do you have the external coil attached to the MSD dizzy? if not. That's why...lol.

Get a stock distributor. Or an external coil that attaches to the MSD dizzy.

http://importnut.net/msdcoil.htm

If you do have everything. Is the dizzy connected to your harness?

 

[slod16]

1.obd1 p72 im using a obd2 to obd1 harness for it
2.yes it says blaster on its like a little block type deal that plugs onto the dizzy and yes its connected the wierd thing abt it is it was getting spark a weak spark but it fired up for second and now no spark

 

[2NRSTV]

Is it turning over?
Make sure the fuel pump is priming.
Check Spark at plugs.

 

[slod16]

its turning over
fuel pump is priming
no spark

 

[slod16]

its the dizzy it runs good just need a new one