Hey i have an H22 and it bogs out when i step on the gas. I have done just about everything i can think of. Distributor, Map Sensor, Wires, Plugs, Timing is fine. If the car is in nuetral it will rev up fine. But if im driving and go to mash on it, it just doesnt seem to want to go. Another thing is that my H22 is only reving out at 6700 instead of 7200. ANYONE HELP!!!!!!
H22 ** Bogging ** Help Please!
- Thread starter Rowdyjrb86
- Start date
well if you have any check engine lights the car could be in a sort of limp mode and will act weird in an attempt for it not to get damaged.
How's your oil?
its not oil related... its your ECU and its most likely a CEL related problem.
Mine will go into this "limp" mode and the rev limiter kicks at 6800 instead of 8200, but it still pulls decent up until then. Not quite as hard, but it still pulls pretty good.
Diagnose any CEL's and try to find what it may be.
Mine will go into this "limp" mode and the rev limiter kicks at 6800 instead of 8200, but it still pulls decent up until then. Not quite as hard, but it still pulls pretty good.
Diagnose any CEL's and try to find what it may be.
its in the ECU, most likely, is it auto or manual?
Its a manual but has an automatic computer, this is the 2nd h22 and the first ran fine for a while then started acting up, so could it possibly be that the ecu went bad then ?
I would try another ecu.
