H22a in civic

[PIMPINCIVIC94]

i am tryin to get a h22 swap in my civic and i herd that u would have to swap out the axels too, is this true or can i just swap the engines

 

[connies96hatchie]

i am tryin to get a h22 swap in my civic and i herd that u would have to swap out the axels too, is this true or can i just swap the engines

yep axels, mounts, ecu, i think wiring harness too

 

[Jezek]

lol...you cannot just swap out motor for motor.... please do a search on the topic, it has been covered more times than you can imagine....

 

[CRXsiterror]

I'm guessing its a 92-95 civic? well yes, mounts for the h22, linkage, ecu, axels, and thats about it besides some things if you have a ex or si civic, I dont think you need to do any wireing becuase its already ran for v-tec?

 

[96 DX Hatch]

please dont listen to these imitators & liars




the H22A will bolt right up to your current D16 motor mounts. Its a known & proven fact.

the wiring harness only needs 1 change, and you will the header off of a 94-97 acura integra RS ONLY!!!
The shift linkage needs to come from a 1991 PRELUE ONLY!!!
As for brakes & suspension, use both from a 1991 CRX HF (or DX)
There will be no changes needed for axles, ecu, etc...

once u have that done, put in the key and go!!!

 

[Jezek]

^^^lmfaooooooooooooooooooooooooooooooooooooooooooo

 

[that VERBAL]

please dont listen to these imitators & liars




the H22A will bolt right up to your current D16 motor mounts. Its a known & proven fact.

the wiring harness only needs 1 change, and you will the header off of a 94-97 acura integra RS ONLY!!!
The shift linkage needs to come from a 1991 PRELUE ONLY!!!
As for brakes & suspension, use both from a 1991 CRX HF (or DX)
There will be no changes needed for axles, ecu, etc...

once u have that done, put in the key and go!!!

you have no clue what you are talking about.

 

[96 DX Hatch]

you have no clue what you are talking about.

it was a joke

i was planning on doing the same thing as jezek (motor, turbo, outside except green not yellow) so i know thats not what u need...im just tired of this being asked every day and people cant seem to use the search feature

 

[hanlon_civic]

ahahaha! but really....i think only up to 93 the harness was made for VTEC after that year you have to run the 2 wires to the ecu from the harness unless it was already a VTEC model.

 

[that VERBAL]

it was a joke

i was planning on doing the same thing as jezek (motor, turbo, outside except green not yellow) so i know thats not what u need...im just tired of this being asked every day and people cant seem to use the search feature

I thought you seriously thought that.

 

[stealthy]

wow you have a LOT of research to do if you plan on getting a h22 in your car....