Here We Go

[civic99white]

OK ILL MOST LIKELY GET BAGGED FOR THIS BUT I THINK I READ A POST THAT SOME ONE PUT A B SERIES INTAKE MANAFORLD IN A D SERIES IS THAT TRU AND IF IT IS WHATS THE DIFFERANCE THANKS MUCH ONCE AGAIN ILL MOST LIKELY GET BAGGED THANKS

 

[12.8:1 Ls/vtec]

No

 

[Genuine Rolla]

You cannot put any D series parts on a B series & vice versa.

 

[Szady]

You cannot put any D series parts on a B series & vice versa.

Throttle bodies fit. I know people w/B18 throttle bodies on D16 manifolds.

 

[xxsenceo89x]

Throttle bodies fit. I know people w/B18 throttle bodies on D16 manifolds.

i heard of people using ls ones.

 

[Genuine Rolla]

....with that exception.

 

[civic99white]

Whats The Differance Is The Throtal Body Bigger And How Much Bigger Thank For Not Talking Smack And Giving St8 Forward Answers

 

[ryan89crx]

You cannot put any D series parts on a B series & vice versa.

gam gears can also work on dohc zc motors

OP, turn caps lock off

 

[12.8:1 Ls/vtec]

You can put F series, H series,gsr, Ls, b16, type R throttle bodies on any one of these motors, just the bolt pattern is the same and they'll all fit, just the throttle lever may e a little different on a few but they still work except the gsr, which just requires a couple of gsr brackets.

 

[civic99white]

is there any beafits to changing to one of those

 

[LowNotSlow]

A little more room for air to flow.

 

[12.8:1 Ls/vtec]

no benifits unless you portmatch the D mani, then you will probably just have a little better throttle response and run a little lean.