Will ship most item. local pick-up also available.
call 754-581-1204 or email at UrWorstEnemy_50@hotmail.com
Manual P28:
chipped - $150
as is, stock - $80
94 integra JDM guage cluster $200 obo
brand new in the box, never used, Skunk2 front camber kit for CIVIC/INTEGRA $200
SOHC Aerospeed 4-2-1 headers $80
OBD1 alternator $30
OBD1 uncut VTEC engine harness $60
OBD2 uncut integra GSR VTEC engine harness $100
Full interior harness for a 94 integra $130
GSR fuel pump $50
SOHC Y8 intake manifold $50
includes fuel rail, injectors and FPR
SOHC 92-95 Throttle body, all sensore included $30
SOHC JDM intake manifold $50
includes fuel rail, injectore, and FPR
Want this look??
my 92 civic hatch with 99-00 SI front:
fenders already cut, ready to bolt up $50
2 95 civic seats $50
94 integra passenger side airbag $300 obo
2 full sets $75 each: 94 GSR stock suspension, about 50,000 miles on both sets front and back
92-95 civic stock exhaust piping $20
94 integra full steering column with air bag, make me an offer.
92-95 EX VTEC distributor $50, comes with the cap and wires.
SOHC clutch, pressure plate and trhow-out bearing, slightly used $60
I also have for sale:
Pics upon request
Located in Ft.lauderdale, Florida
The car is a 91 hatch, fully gutted interior with a race certified roll
cage. it is extremely light, with an aluminum dashboard. Need some TLC. Email me, at urworstenemy_50@hotmail.com i have tons of pics.
ENGINE:
B18c1 gsr block
b16 head port and polished
type-r intake manifold
welded b16 tranny
Act stage 2 racing clutch and lightened flywheel
turbonetics 60-1 turbo
turbonetics delta 3 wastegate
HKS BOV
B&M fuel pressure regulator
3" custom downpipe
front mount intercooler
RC 330 injectors
AEM fuel rail
SUSPENSION:
Koni adjustable struts
skunk 2 coilovers
cross drilled rotors in the front
front and rear strut bars
INTERIOR:
Fully gutted interior
SAFC controller
PR4 chipped computer
gauges(A/F, water temp, boost, oil psi, etc).
Aluminum dashboard
JaMex racing seat with harness
Greddy Boost controller
Greddy turbo timer
Roll Cage
EXTRAS:
These are parts i have that WILL come with the car.
3 b16a blocks, 1 is bore 1/4 of an inch over stock
4 SRP pistons for stock b16 block
4 stock b16 pistons and rods
Misc. block parts
about 8-10 extra gauges (a/f, oil psi, water temp, etc)
All gauges are Autometer
brand new ACT stage 1 clutch and 8lbs. lightened flywheel
type-R strut bar
2 sets of B-Series shift linkage
1 Tachometer
1 GSR intake cam shaft
JDM type-r gauge cluster
2 SCI MSD ignition packs
Integra K&N filter
2 B16 Crankshafts
1 intermediate shaft
All these parts and the car i'm letting go for $4500 OBO. everything in the
pictures is what your getting. call 754 581 1204 for more info or email me
at UrWorstEnemy_50@hotmail.com.
call 754-581-1204 or email at UrWorstEnemy_50@hotmail.com
Manual P28:
chipped - $150
as is, stock - $80
94 integra JDM guage cluster $200 obo
brand new in the box, never used, Skunk2 front camber kit for CIVIC/INTEGRA $200
SOHC Aerospeed 4-2-1 headers $80
OBD1 alternator $30
OBD1 uncut VTEC engine harness $60
OBD2 uncut integra GSR VTEC engine harness $100
Full interior harness for a 94 integra $130
GSR fuel pump $50
SOHC Y8 intake manifold $50
includes fuel rail, injectors and FPR
SOHC 92-95 Throttle body, all sensore included $30
SOHC JDM intake manifold $50
includes fuel rail, injectore, and FPR
Want this look??
my 92 civic hatch with 99-00 SI front:
fenders already cut, ready to bolt up $50
2 95 civic seats $50
94 integra passenger side airbag $300 obo
2 full sets $75 each: 94 GSR stock suspension, about 50,000 miles on both sets front and back
92-95 civic stock exhaust piping $20
94 integra full steering column with air bag, make me an offer.
92-95 EX VTEC distributor $50, comes with the cap and wires.
SOHC clutch, pressure plate and trhow-out bearing, slightly used $60
I also have for sale:
Pics upon request
Located in Ft.lauderdale, Florida
The car is a 91 hatch, fully gutted interior with a race certified roll
cage. it is extremely light, with an aluminum dashboard. Need some TLC. Email me, at urworstenemy_50@hotmail.com i have tons of pics.
ENGINE:
B18c1 gsr block
b16 head port and polished
type-r intake manifold
welded b16 tranny
Act stage 2 racing clutch and lightened flywheel
turbonetics 60-1 turbo
turbonetics delta 3 wastegate
HKS BOV
B&M fuel pressure regulator
3" custom downpipe
front mount intercooler
RC 330 injectors
AEM fuel rail
SUSPENSION:
Koni adjustable struts
skunk 2 coilovers
cross drilled rotors in the front
front and rear strut bars
INTERIOR:
Fully gutted interior
SAFC controller
PR4 chipped computer
gauges(A/F, water temp, boost, oil psi, etc).
Aluminum dashboard
JaMex racing seat with harness
Greddy Boost controller
Greddy turbo timer
Roll Cage
EXTRAS:
These are parts i have that WILL come with the car.
3 b16a blocks, 1 is bore 1/4 of an inch over stock
4 SRP pistons for stock b16 block
4 stock b16 pistons and rods
Misc. block parts
about 8-10 extra gauges (a/f, oil psi, water temp, etc)
All gauges are Autometer
brand new ACT stage 1 clutch and 8lbs. lightened flywheel
type-R strut bar
2 sets of B-Series shift linkage
1 Tachometer
1 GSR intake cam shaft
JDM type-r gauge cluster
2 SCI MSD ignition packs
Integra K&N filter
2 B16 Crankshafts
1 intermediate shaft
All these parts and the car i'm letting go for $4500 OBO. everything in the
pictures is what your getting. call 754 581 1204 for more info or email me
at UrWorstEnemy_50@hotmail.com.