Ok if u take a stock b20 long block and use a stock b16 vtech head what will the horsepower be??? I just need an idea,, the b16 is 160 ,,so???
what does ur setup gethorsepower, about 180ish.
Listen. NOBODY on the interwebs is going to be able to tell you how much power you are going to make. Also, almost NOBODY has a stock B20/vtec or LS/vtec because it would be pretty unreliable. If you are going to build one, it would not be a good idea to leave a stock block, since the vtec head would rev much higher than the stock block was made for.
How many posts are you going to have to make about this before you understand that? Build the motor, dyno it, and then come back and tell us what you make.
Well I have to tell u I have heard alot of people tell me that the stock block will do just fine witha vtech head..... U are the only person that I have ever heard say that the block wont hold
Do what you want, but I wouldn't trust it. At the very least go for a block girdle.
Well I have to tell u I have heard alot of people tell me that the stock block will do just fine witha vtec head..... U are the only person that I have ever heard say that the block wont hold
about 220whp and 240wtqwhat does ur setup get
either way, youre still rightMine was hp to the crank, vandy's is whp, just to note.
I had a 1990 integra ls with this in it.. i had a b20 block with a 2000 si head i was making about 210 hp with intake headers exhaust type r valves and type r intake mani....Ok if u take a stock b20 long block and use a stock b16 vtech head what will the horsepower be??? I just need an idea,, the b16 is 160 ,,so???