Engine
JDM B18C w/ JDM S80 Tranny
Airis 10.2:1 pistons .025 over
Eagle H-Beam Rods
ACL Race bearings
Cometic HeadGasket
OmniPower Valve Springs/Retainers
AEBS Intake Manifold
Edlebrock 65mm Throttle Body
Custom 3" turboback exhuast with greddy EVO muffler
Full Race Traction Bar/Crossmember
Fluidyne Radiator
Slim Radiator Fan
Stock Machined Crank Pulley.
Innovative Black Mounts
Competition Clutch Stage 4 Clutch
Fidanza 7.5lb flywheel
Interior
OEM GSR Cloth seats
All carpet and rear seats removed, all painted flat black
Removed A/C, and Heat blower
Removed sound deadening
DC Short Shifter
HOP Radio Block Off
Exterior
Vision SmokedAmber Corners
Blackhousing Headlights
Antenna Block-Off*
Suspension/Wheels
FunctionForm Coilovers
OEM 99-00 Si wheels
Hankook Ventus R-S2 Z212 in rear 195/50-15
BFGoodrich g-Force Sport in front 195/50-15
*these are my plans, but havent actually gotten them yet
** i was thinkin fluidamper -- any opinions?
__________________
Here's the pictures:
right after i pulled the engine
after removing abs, ps, and a/c
the worksite
the wire tuck
how it sits during the week
Windshield stickers
Exterior as it sits
Interior
any questions?
JDM B18C w/ JDM S80 Tranny
Airis 10.2:1 pistons .025 over
Eagle H-Beam Rods
ACL Race bearings
Cometic HeadGasket
OmniPower Valve Springs/Retainers
AEBS Intake Manifold
Edlebrock 65mm Throttle Body
Custom 3" turboback exhuast with greddy EVO muffler
Full Race Traction Bar/Crossmember
Fluidyne Radiator
Slim Radiator Fan
Stock Machined Crank Pulley.
Innovative Black Mounts
Competition Clutch Stage 4 Clutch
Fidanza 7.5lb flywheel
Interior
OEM GSR Cloth seats
All carpet and rear seats removed, all painted flat black
Removed A/C, and Heat blower
Removed sound deadening
DC Short Shifter
HOP Radio Block Off
Exterior
Vision SmokedAmber Corners
Blackhousing Headlights
Antenna Block-Off*
Suspension/Wheels
FunctionForm Coilovers
OEM 99-00 Si wheels
Hankook Ventus R-S2 Z212 in rear 195/50-15
BFGoodrich g-Force Sport in front 195/50-15
*these are my plans, but havent actually gotten them yet
** i was thinkin fluidamper -- any opinions?
__________________
Here's the pictures:
right after i pulled the engine
after removing abs, ps, and a/c
the worksite
the wire tuck
how it sits during the week
Windshield stickers
Exterior as it sits
Interior
any questions?