my 2.2 92 cx finally

[jasonsa]

Hey guys well this took me a while to get up but here she is my 92 cx. My mods are 94 h22a1, msd digital six ignition, Apexi v-afc, Obx catback, tenzo seats, rs limited wheels, lowered, angel eye headlights, s2000 titanium mica paint, underdrive crankshaft pulley, act 2600 w/ 6 puck disk, hasport axles and motormounts. Couple other things that I can't remember right now. By the way if anybodys interested in shooting me some offers go ahead. Thanks for looking. I'll try to repost in the next few with new day time pics.

 

[element_323]

Got any daytime pics??? Car looks ok from what I can see.

 

[jasonsa]

I just took these these pics. I will probably try and get better ones up tomarrow.

 

[slambed_civic]

tiny ass pixers!

 

[LatinEM2]

need bigger pics...looks nice from what i see..

 

[jasonsa]

I tried to put bigger pictures but the computer told me the file was too big. Is there a way to get around this or whats the biggest I can go?

 

[anfrey]

looks good from what i can see. bigger pics would be GREATLY appreciated

 

[Svr_Civic]

put it in paint and decrease it 50% till it looks purtty good....then upload and see what it looks like

 

[Destroy]

so its for sale...? thats a potent CX setup....thats mid 13's right there....those blue seats go really well with the car

 

[Civicdreams]

How fast does ur hatch do the 1320

 

[jasonsa]

I haven't gotten a chance to take it to the track yet but I'm pretty confident that it is mid to low 13's. When I take it to the the track I'll post some times. I'm testing waters to see what offers I get.

 

[Mr. Lin]

H22s are nice, but are poor for hatches due to the incredible weight and poor balance. If you can get it to work, more props to you. Damn, you've been a member from the beginning...

 

[tonyM]

you got any tips on how u got yer seats in?????
you do it yerself?
or did you use a pre-fab kit????????

 

[jasonsa]

Actually Mr. Lin the h22 is running in my car. It has been for about three years now. The seats are on prefabricted brackets that I purchased from Manchester Honda.

 

[Destroy]

I haven't gotten a chance to take it to the track yet but I'm pretty confident that it is mid to low 13's. When I take it to the the track I'll post some times. I'm testing waters to see what offers I get.

remember u will need slicks though......

 

[evan2]

hey dude i can tell you how to make custom brackets, you just have to take the stock sliders and brakcets off your honda seats and hack them up

then get some 1/4' thick aluminum 4 18in long pieces
and then i call tell you the rest of the measure ments

you just drill 4 holes into each piece
then i hope you can figure it out from there... its easy

 

[94civicDX]

looks good man slap a turbo on tere and wooooo big time power prob i dunno but yea good job

 

[jasonsa]

thanks for alll the feedback. I'm looking into buying a set of slicks. But, for now I have a friend who will let me borrow some.

 

[Civicdreams]

arent H22's in a hatch to big for turbo setups???? Dunno
Ur car is sick for the strip man but on corners alot of civics will lose you???

You should consider a shot of nitrous on the engine

 

[jasonsa]

Here's the day time pixers you all asked for.