My GSR swapped Civic EJ

[NateDaGSR]

Hello everyone, I was just looking to get some opinions on my new (to me) 94 Civic EJ.
So far it has:

94 Integra GSR 100K miles
Cams
Intake
4 Puck clutch
2.5" exhaust
Stock muffler
4-Point rollcage
Full DC2 interior
Vtec Controller
Riding on cut springs


I was thinking about slapping in an exhaust, suspension and some rims.

Let me know what you guys think!



Uploaded with ImageShack.us

Uploaded with ImageShack.us

 

[civicmand16y7]

Hello everyone, I was just looking to get some opinions on my new (to me) 94 Civic EJ.
So far it has:

94 Integra GSR 100K miles
Cams
Intake
4 Puck clutch
2.5" exhaust
Stock muffler
4-Point rollcage
Full DC2 interior
Vtec Controller
Riding on cut springs


I was thinking about slapping in an exhaust, suspension and some rims.

Let me know what you guys think!



Uploaded with ImageShack.us

Uploaded with ImageShack.us

im digging it i would do the suspenion before you do anything. driving around on cut springs is not safe

 

[Robin...]

Clean, not digging the headlights though...

 

[civicmand16y7]

i for got to say i would like to see pic of the inside sir

 

[00_Civic_Si]

Clean, not digging the headlights though...

 

[NateDaGSR]

I knew not many people would like the headlights . Next is definitely a suspension though, i felt my headers yesterday and they are pretty much crushed

 

[civicfan111]

Yah, ur original headlights and amber courners looked better. Otherwise, she looks clean.

 

[NateDaGSR]

She definitely owns the road with that B18 too.

 

[EdwinBlack]

It definitely has potential and you should get the original headlights back.
You have any idea yet wich suspention it's going to be?

 

[NateDaGSR]

I'm not very sure which suspension but I've been looking into Koni Yellows with Ground Control. What do you guys prefer?

 

[R3dline]

i prefer you get your old headlights back, thats what i prefer

 

[Hecz]

what type of strut tower bar is that?
I see It bolts to the fire what through two ear bracket. Did you have to weld that bracket on the fire wall?

Looks freaking good man!

 

[purpej1]

on suspension depends on budget. if you have a few hundred to spend get f&f or for less go with the koni's and gc's both have good results

 

[JohnS.]

Clean! Just work on that suspension.

Out of curiosity, have you taken it to the track or know what it runs in the 1/4?

 

[civicmand16y7]

Clean! Just work on that suspension.

Out of curiosity, have you taken it to the track or know what it runs in the 1/4?

yea i like to know to

 

[NateDaGSR]

Clean! Just work on that suspension.

Out of curiosity, have you taken it to the track or know what it runs in the 1/4?

No track yet but I'm positive that it's pushing 12's at least. I still need a muffler to have it run better though.

 

[NateDaGSR]

i for got to say i would like to see pic of the inside sir

 

[civicmand16y7]

thank you sir for inside pic. looks really really clean in there...im also digging the hanging monkey from the cage

 

[somejaykid]

looks good yo reminds me of my eg minus the headlight and what's up with the 4 puck clutch? your not putting down 400 whp on that thing just my opinion. and what's with the hood pop like that? it looks tacky

 

[NateDaGSR]

looks good yo reminds me of my eg minus the headlight and what's up with the 4 puck clutch? your not putting down 400 whp on that thing just my opinion. and what's with the hood pop like that? it looks tacky

The clutch was done by the guy before me and the hood is raised to fit the throttle cable from the Integra engine.