JDMJNKY
Banned
here's how it begins...well i bought a d16z6 swap w/ a full greddy kit ..not bad i guess.( FMIC, PIPING, real HKS SSQV, includes all the goodies minus the gay blue box!) Not planning to go all out just a nice roller!
FUTURE PLANS!!!
Head:
Full PnP head, IM, EM match port
JG complete VT
Crower 63441yt (has more agreessive low end 900-7500 rpm vs. comp 59300 @ 2000-7200 rpm)
Cometic HG
RAGE Cam Gear (whitfield inc.)
Block:
75.5mm bore
Block gaurd (affraid to do block posting on my own, dont wanna go to far.)
8:5.1 75.5 mm vitaras if i can find them, would love to have a 9:1 would be perfect for the day i add a JRSC...futuristically speaking....
H-beam rods
OEM pumps
OEM Timing belt
Turbo
15g greddy kit for now
new oil line kit
Trans
SI Custom geard TRANNY!
obx LSD
stage 4 psi plate
6 puck sprung disc
8lb fly
FM:
Chrome & chipped p28 along w/ 440cc injectors, EBC/
Current mods
TURBO GREDDY 15g
Head :
Stock w/ RAGE Cam gear
BDL fuel rail ( FREE, courtesy of eibach & nick @ BDL)
Block:
Stock w/ KMS Block Guard
All New gaskets & seals
New Pumps
OE belts
New Oil pick
Trans:
8lb wheel might go w/ a 10lb
XTD stg 4 psi plate 6 puck sprung disc
FM
Oem Injec.
p28
apex NEO
well i sent my head out to my boy Jason & staff @ WHITFIELD for some resurfacing, dont plan to build it til it breaks. that's just me! also I cleaned up my block, w/ some micro-polishing lemme know what ya think, i did the head to but doesnt look as hawt but it looks good!
Then polished, needs a lil more elbow grease!
IM mani be4/after psi wash
HERES SOME BE4 SHOTS:
THEN SOME IN BETWEEN:
THEN AFTER! :TU:
The latest & greatest to help ease the starin on some parts @ 10 psi!
ARP flywheel bolts (old ones stripped from previous idiot)
ARP Headstuds ( I dont want no stinkin' lift)
Kms Block Gaurd (gotta hold them sleeves 2gether)
Here's my BDL fuel rail I won @ eibach!
FUTURE PLANS!!!
Head:
Full PnP head, IM, EM match port
JG complete VT
Crower 63441yt (has more agreessive low end 900-7500 rpm vs. comp 59300 @ 2000-7200 rpm)
Cometic HG
RAGE Cam Gear (whitfield inc.)
Block:
75.5mm bore
Block gaurd (affraid to do block posting on my own, dont wanna go to far.)
8:5.1 75.5 mm vitaras if i can find them, would love to have a 9:1 would be perfect for the day i add a JRSC...futuristically speaking....
H-beam rods
OEM pumps
OEM Timing belt
Turbo
15g greddy kit for now
new oil line kit
Trans
SI Custom geard TRANNY!
obx LSD
stage 4 psi plate
6 puck sprung disc
8lb fly
FM:
Chrome & chipped p28 along w/ 440cc injectors, EBC/
Current mods
TURBO GREDDY 15g
Head :
Stock w/ RAGE Cam gear
BDL fuel rail ( FREE, courtesy of eibach & nick @ BDL)
Block:
Stock w/ KMS Block Guard
All New gaskets & seals
New Pumps
OE belts
New Oil pick
Trans:
8lb wheel might go w/ a 10lb
XTD stg 4 psi plate 6 puck sprung disc
FM
Oem Injec.
p28
apex NEO
well i sent my head out to my boy Jason & staff @ WHITFIELD for some resurfacing, dont plan to build it til it breaks. that's just me! also I cleaned up my block, w/ some micro-polishing lemme know what ya think, i did the head to but doesnt look as hawt but it looks good!
Then polished, needs a lil more elbow grease!
IM mani be4/after psi wash
HERES SOME BE4 SHOTS:
THEN SOME IN BETWEEN:
THEN AFTER! :TU:
The latest & greatest to help ease the starin on some parts @ 10 psi!
ARP flywheel bolts (old ones stripped from previous idiot)
ARP Headstuds ( I dont want no stinkin' lift)
Kms Block Gaurd (gotta hold them sleeves 2gether)
Here's my BDL fuel rail I won @ eibach!