ok i just put coilover sleaves on a 7th gen and on the top there are bearing are those needed i cant get them to stay in there it dosent look like i do but i have never done these on a 7th gen i have 6th gen i just dont know why i would need bearings in my shocks thanks CC
need help
- Thread starter civic99white
- Start date
If you not a "gentle" driver or have to contend with bad roads trash the sleeves and get real coilovers. DON'T make my expensive mistake.
Why what happened to you
Car: 1993 Honda Del Sol Si, Grip spec.
Do to PAs notoriously bad roads, on entry to a 6% grade/negative pitch downhill with no warning of the coming tight S turn, the severe load placed on the front and rear passanger side sleeves caused the front unit to split/collapse and the rear unit to crack resulting in $1300 in damage to the car not including having to get the car towed.
Do to PAs notoriously bad roads, on entry to a 6% grade/negative pitch downhill with no warning of the coming tight S turn, the severe load placed on the front and rear passanger side sleeves caused the front unit to split/collapse and the rear unit to crack resulting in $1300 in damage to the car not including having to get the car towed.