so last night i was going to install my OEM foglights, i wired everything up and nothin happened, so i tested power after the inline fuse ( there was power), and then after the relay (no power) so what do i do? get a new 12v relay? any suggestions? 8)
OEM civic foglight install
- Thread starter egcivicb16a
- Start date
try a new relay.
you should be able to hear the relay clicking. So if you press the button and hear it clicking on and off, it's still good.
Check the grounds and everything, but it might have blown the fuse or relay.
I've gone through like 4 relays. LOL.
Check the grounds and everything, but it might have blown the fuse or relay.
I've gone through like 4 relays. LOL.
Hatch_Of_Doom said:you should be able to hear the relay clicking. So if you press the button and hear it clicking on and off, it's still good.
Check the grounds and everything, but it might have blown the fuse or relay.
I've gone through like 4 relays. LOL.
well i picked up a new relay today, still nothin, fuse looks good, there was power after it yesterday, so anyone know what it could be? maybe the wiring on the interior?
Check the wiring on the relay.
85 ground
86 Switched 12v
30 12v
87 12v output when active
87a not used
85 ground
86 Switched 12v
30 12v
87 12v output when active
87a not used