re-install stock suspension help

iamcivic

zdnfhsz fhz
Registered VIP
5+ Year Member
10+ Year Member
Hey guys,
I re-installed my stock suspension today, but somethings wrong. When I tested it it felt all lose and pulled extremely to the right. I put the factory front camber back on, but I left the adjustablerear on( couldn't find the factory rear) so the back of the car is out of alightment. I wouldn't think it would make that dramatic of a right pull though. Also had to use the shortened bump stop and dust cover from where I had to cut them for the aftermarket shocks. Could this cause a problem. Help me out. btw all the bolts were double checked to make sure they were tight.
 

henkz0r

Unobtanium Member
Registered VIP
5+ Year Member
10+ Year Member
You still must have your front toe and rear toe aligned.
 




Top