SI rear sway bar

[hope4LI]

I have a 96 EX and I want to install the rear sway bar from the SI. Does the bar bolt right up or are there some issues with the install? Will I need any other parts off of the SI to install the bar? Thanks for the help.

 

[HP Civic 2]

I have one sitting in my garage, uninstalled of course. I looked and I am pretty sure the EX's come predrilled for the Si sway bar.

 

[evilEK98]

yes it should fit i have one on my HX, it fit no problem, i had it on in like 30 mins easy.

 

[anekin007]

the only thing u will need is 4 nuts for the 4 bolts that is use for the d link. other models didnt come with welded on nuts like the si so using nuts will correct the problem.

 

[hope4LI]

Thanks for the help.

 

[Initial D]

Here's a list of all the parts you need.

 

[chimchim]

Bolts right up. I did that to my 97 EX.

However, the LCA's on the Si have welded nuts or something, so you're gonna need nuts and lock washers to secure the endlinks to your LCA's.

 

[anekin007]

^^ the welded nuts are not on the lca. all civics have the same lca. the welded nut is on the inside of the subframe.