Amace013
New Member
Hey all I've recently had a b18b1 swapped into my 98hx I've had problems starting since day one it will start jump to 2k and the just fall to 0 if I hit the throttle it bogs and dies faster if I partially hit it repeatedly it will revup but do the same and die. It does this nonstop until the engine warms up
I've replaced
Plugs / wires
Iacv from a good working motor
Throttle body with the map and tps from working motor
Fuel pressure regulator
One sensor I see that is not plugged in is the one bolted into the top of the intake manifold just can't fit out what it is.
Also I've been told I should try changing my iat intake air temp sensor
Any other suggestions I hate having this problem everytime I start my car when its not warm
I've replaced
Plugs / wires
Iacv from a good working motor
Throttle body with the map and tps from working motor
Fuel pressure regulator
One sensor I see that is not plugged in is the one bolted into the top of the intake manifold just can't fit out what it is.
Also I've been told I should try changing my iat intake air temp sensor
Any other suggestions I hate having this problem everytime I start my car when its not warm