Hello,
Well, now that I have gotten everything much more organized, it is time to start this build thread again. This is my first build, but I am making sure I do it right the first time. I will be open to all comments and trolling. Any criticism good or bad is welcome on this thread.
Here is the 1996 DX Hatch when I first bought it back in June of 2012:
Shortly after I got it, I bought my first parts for it to make it more comfortable as a daily driver. These parts consisted of an SI gauge Cluster. GSR Leathers, Ebay short throw Shifter, Speakers all around, and Ebay shift knob (now spoon duracon knob).
This car is going to be completely built from scratch by myself.
Now lets start with the future plans for the car:
Exterior List:
-First Molding Front Lip
-Bomex or Mugen Wing
-OEM rear lip
-Retrofit Headlights
-4300k HID's
-New rear quarter panels done
-Championship White paintjob
-XXR 002; 16x8; 4x100; Black w/ Machined Lip-Yokohama S Drive; 215/45/16
-OEM Hood Bra
Interior List:
-Custom Headliner
-Custom door panel vinyls
-Custom sun visors
-ek4 armrest with custom cloth cover
-5 point harness (undecided on what)
-Legit Racing Seats that actually meet and surpass safety standards
-Airbag Delete
-QR Steering Wheel
Audio/Video List:
-Pioneer AVH-P6300BT
-Polk Audio DXi6500
-Polk Audio DXi690
-Alpine MRX-F65
-Alpine SWX-1243D
-Alpine MRX-M110
-Wiring/Capacitor/etc...
Suspension List:
-Ground Control Coilovers
-Koni Yellow Shocks
-Blackworks Racing Lower Control Arms
-Blackworks Racing 3 Point Front Strut Bar
-Blackworks Racing Rear Strut Bar
-Blackworks Racing Rear Tie Bar
Engine List:
-B18a1 Block
-B16a2 Head
-B16a2 Transmission
-LS 5th Gear
-Mishimoto Performance Radiator
-Mishimoto Silicone Radiator Hose Kit (Blue)
-Mishimoto 12” Fan
-ITR Pistons
-ARP Rod Bolts
-ACL Duraglide Bearings
-Rocket Snapfit Dual Valve Springs
-Evo 560CC Injectors
-70mm Throttle Body
-Blox Racing HSL or Stage 1
-ITR Header
-Yonaka Catback Exhaust or Megan Racing Driftspec Exhaust
-Oversized Intake Valves
-Golden Eagle Fuel Rail
-Skunk2 Intake Manifold
-EK Swap Parts
-Gaskets
-Maintenance parts, etc…
-Hone, Port, Machine work
Well, now that I have gotten everything much more organized, it is time to start this build thread again. This is my first build, but I am making sure I do it right the first time. I will be open to all comments and trolling. Any criticism good or bad is welcome on this thread.
Here is the 1996 DX Hatch when I first bought it back in June of 2012:
Shortly after I got it, I bought my first parts for it to make it more comfortable as a daily driver. These parts consisted of an SI gauge Cluster. GSR Leathers, Ebay short throw Shifter, Speakers all around, and Ebay shift knob (now spoon duracon knob).
This car is going to be completely built from scratch by myself.
Now lets start with the future plans for the car:
Exterior List:
-First Molding Front Lip
-Bomex or Mugen Wing
-OEM rear lip
-Retrofit Headlights
-4300k HID's
-New rear quarter panels done
-Championship White paintjob
-XXR 002; 16x8; 4x100; Black w/ Machined Lip-Yokohama S Drive; 215/45/16
-OEM Hood Bra
Interior List:
-Custom Headliner
-Custom door panel vinyls
-Custom sun visors
-ek4 armrest with custom cloth cover
-5 point harness (undecided on what)
-Legit Racing Seats that actually meet and surpass safety standards
-Airbag Delete
-QR Steering Wheel
Audio/Video List:
-Pioneer AVH-P6300BT
-Polk Audio DXi6500
-Polk Audio DXi690
-Alpine MRX-F65
-Alpine SWX-1243D
-Alpine MRX-M110
-Wiring/Capacitor/etc...
Suspension List:
-Ground Control Coilovers
-Koni Yellow Shocks
-Blackworks Racing Lower Control Arms
-Blackworks Racing 3 Point Front Strut Bar
-Blackworks Racing Rear Strut Bar
-Blackworks Racing Rear Tie Bar
Engine List:
-B18a1 Block
-B16a2 Head
-B16a2 Transmission
-LS 5th Gear
-Mishimoto Performance Radiator
-Mishimoto Silicone Radiator Hose Kit (Blue)
-Mishimoto 12” Fan
-ITR Pistons
-ARP Rod Bolts
-ACL Duraglide Bearings
-Rocket Snapfit Dual Valve Springs
-Evo 560CC Injectors
-70mm Throttle Body
-Blox Racing HSL or Stage 1
-ITR Header
-Yonaka Catback Exhaust or Megan Racing Driftspec Exhaust
-Oversized Intake Valves
-Golden Eagle Fuel Rail
-Skunk2 Intake Manifold
-EK Swap Parts
-Gaskets
-Maintenance parts, etc…
-Hone, Port, Machine work
Last edited: