swap help

[95exb18]

hey guys, got a couple questions, im putting a jdm b16a obd0 in my 94 ex, what all am i gonna have to do to wire the engine?

 

[CHILD]

Run a wire from the vtec solenoid to the canon plug on the passenger side of the bay, a obd0 to obd 1 conversion harness with an obd 1 ecu if using the engine harness with the motor, or just use the engine harness you have now with a obd 1 vtec ecu.

 

[95exb18]

I have the b16 being ran by obd0 harness with p28 with conversion harness. I don't have a harness for my ex. So when I swap my b16 from my crx to the civic will I have to completely require everything or what is my question.

 

[obracer12]

You are going to have to run the appropriate wires to the appropriate pins on the ECU...

But to more generally answer your questions, I would pull the harness from the CRX and lengthen wires as needed for simplicity.

You will require the wire and ECU for it to run, you may have to run a few miscellaneous lines/wires for the cluster etc...