well i DO have oem front and rear sway bar..i don't know how big they are..i'm still researching for the size..my car is a 95 LX 4drs..i was looking at the ST Suspension sway bar on ebay..their website said front is 25mm and rear is 19mm..i read somewhere that the rear is 20mm stock..but it wasn't confirmed so it's still debatable..also looked at the ASR brace, boy those thing are pricey..would u still need the subframe brace even though u have stock rear sway on board??
the ST suspension kit didn't say anything about needing it..i didn't think u would need it unless ur car didn't come with one.
i'm looking for something that bolt right on with everything i have stock..no need for extra lca or anything..may need blox endlink though..but i'm not very sure about it..
front OEM for a '95 4dr LX is 21mm
*confirmed on majestic honda*. im not 100% sure about the rear, but my guess would be its the same 13mm on the SI hatch model
*oem size list*.
since u already have a front swaybar, just upgrade the rear. when you upgrade the rear, u'll want a subframe support of some kind, either Beaks or ASR are fine. also, when u upgrade the rear swaybar, u end up using larger d-brackets and that widens the mounting holes on the subframe. that means u'll have to drill 2 holes into the subframe to mount the bar. its not hard but a must.
i run the Beaks 22mm SRK on my '95 EX and i've put it through about 15 autox events and a novice school last year along with daily driving it for about 8 months, never had any problems with it.