Throttle Body Sizes help

[JETullous]

I am tring to find the sizes of throttle bodies for the different sizes of engines. Does anyone have this information? Please share.

 

[1990crx]

i would like that to if any one knows what thay are,

 

[destructn]

here ye go

http://www.hondaswap.com/forums/index.php?showtopic=29792

 

[JETullous]

Your the man!

 

[1990crx]

what kind of plate do i need to make to put a b motor tb on a d motor.

 

[Illegal]

nothing. I put my old '00 si one on my friends 98 ex turbo with no problems

 

[1990crx]

i thought that on a b motor that the mounts were diffent spacing then the d motor. so if thats the case your telling me that i can get a tb from a gsr and it will bolt up. i dont think so. i will need a plate but i dont know of any one that makes one or where i can get the spec. on one of them.

 

[Steven.]

why not just get one form a D series motor?

 

[io_303]

i thought that on a b motor that the mounts were diffent spacing then the d motor. so if thats the case your telling me that i can get a tb from a gsr and it will bolt up. i dont think so. i will need a plate but i dont know of any one that makes one or where i can get the spec. on one of them.

you dont need a plate, the bolt pattern for the TB on B D H C and F series intake manifolds are the same. the bore size is diffrent, and unless you port the manifold or get an aftermarket one you will have a lip on the intake.