using skunk2 stage 2 p cams

[ialsoskate]

So i have b16 not in the car yet with skunk2 retainers, pro series springs, pro series cam gears, alpha series valves, ferrera vavle guides, low compression wiseco pistons, eagle rods, and saving up for a gt35r garrett,
so originally i was going to go with n/a but changed my mind after i bought skunk2 stage 2 pro series cam shafts now my question is how will those cams work with this setup?

 

[Charlie5280]

It all has to do with the valve overlap and lift. You really don't want a ton of lift for a boosted car.....but overlap could potentially help with cylinder filling.

I would contact Skunk and see what the specs are on that cam, or look them up.

 

[Failsafe88]

Why a gt35? Why not a gtx30r

 

[xxBLOOD88SHOTxx]

It all has to do with the valve overlap and lift. You really don't want a ton of lift for a boosted car.....but overlap could potentially help with cylinder filling.
I would contact Skunk and see what the specs are on that cam, or look them up.

Reverse that good sir