where to find it all

[bryan81]

ok I'm new to this but it all seems to be much more clear to me now. I know that i want @ least 400hp with turbo, daily driver. Unless someone knows a better engine for this hp# i will get the b18c1. I want the b18 b/c of easy install and decent tq.( the car will be a 5g cp or hb) I have a few ? 4 engine build up
1. pistons/rods where to get them(forged?/names)
2. sleeves, someone said AEBS but s**t those things cost $$$$
recommend other good sleeves please.
3.turbo which one for daily driver + (how much boost to get 400hp)
4. cams/retainers/springs(how much$/names)
5. Heads port/polish(how much$/where)
6. for the turbo what electronics to manage the fuel/air/ignition etc.

* i know this was a lot but damn this s**t is hard
P.S. this forum has helped me out a lot, the people on here really seem to know there s**t (besides myself and a few others)

 

[sleeepy808]

1. eagle rods/JE pistons
2. darton sleeves
3.
4.
5. LDL race engines
6.
may not be much help sorry man. i tried. i never had a turbo, but in my stock 94 rx7. thats why i left 3,4,and 6 blank. i always went all motor. to get your sleeving done, i would go through rs. unless you are going to build the motor yourself, i say let you engine builder pick up the parts. jus so you don't get the wrong ones. they may even be a authorized dealer of them. i was lucky, my engine builder, LDL, is a dealer for toda

 

[skunk2'ed]

www.nopionline.com

www.summitracing.com

Try those sites

 

[anfrey]

sleepercivic99ex on turbod16.com is an authorized options dealer. he can get you anything on the options catalog (www.optauto.com) for cheaper than listed.

 

[SeanMc300]

1. JE
2. Darton
3. go to www.full-race.com friend in hondaswap will soon be running this on his gsr del sol. planning 400whp. check out www.hondaswap.com he is pissedoffsol
4. crower cams, retainers and valve springs.
5. dont know wher you are or what places you can go to.
6. HONDATA 200 with boost option. apexi vafc safc

 

[havok]

I hear that eagle makes some shotty stuff go with crower it's more expensive but it alot more reliable

 

[anfrey]

what about ferrea?

 

[sleeepy808]

Originally posted by anfrey
sleepercivic99ex on turbod16.com is an authorized options dealer. he can get you anything on the options catalog (www.optauto.com) for cheaper than listed.

i usually talk to my friend greg at options auto salon. he hooks it up

 

[needboost]

b18c1 is the way to go man.

 

[rickys2000si]

hrm.
pistons-JE
cams skunk2
skunk2 head for that matter
greddy head gasket
crower rods
b20 bottom end with darton sleeves.
770 cc injectors
hondata s200b tuned.
max rev turbo setup
3"dp
3" exhaust
tial wastegate. 9psi spring
greddy profec b
18psi

should hit ya that high lol 375 or so reliable.

 

[rickys2000si]

and post the sleeves!!! prevent em from shifting.