Which ECU for Poorman's?

[Stock Boy]

I am building a poorman's swap (b16 head/gsr block) and I was just wondering which ECU would be the best to use for this swap? Also, I got an AFPR and I wanted to kno if a VAFC would be needed. I am just getting bolt ons but it does have b16 pistons. Thanks in advance for the help!

 

[Going-West]

I'm getting a chipped ecu from www.phearable.net, it's a little spendy but you tell them what your engine is, what mods you have, and they tailor it specifically for you setup for optimum power.

 

[Shiznit]

chipped p06 is the samething as a chipped p28, you just need to find out if its been modified for vtec or not

 

[Stock Boy]

so a chipped p06 or a chipped p28 would work for my setup? oh also i was wondering, my civic is a 97 cx and the motor that is going in is obd2 (b16a2 head) so do i need a jumper harness or anything to use those ECUs?

 

[Shiznit]

yea obd2b > obd1 jumper harness

 

[93turbo16]

yea obd2b > obd1 jumper harness

I think he needs to specify which harness he is using.

If he is modifying the 97 harness he needs a OBD2A to OBD1 conversion harness.

If he uses a 99-00 harness, then he needs an OBD2B to OBD1 conversion harness.

But your best bet is a chipped P28 ecu.. a chipped P06 that is setup to function as a P28 will work as well.

 

[Stock Boy]

Thank you very much