Will it fir???????

[nightryder99]

Will it fit???????

I was told ( on this site)
that all d,b,h,k throttle bodies where interchangable
if thats the case ....im set
the prob is that i spent quite some cash on an Edelbrock manifold and I dont want to spend another 400 for a tb
im looking for a throttle bigger than a stock d16y8's
until now the only tb I've found in a scrap yeard was for an RS and GS integra
does anybody know the diameter of those tbs ...and if they are worth it?
they go for 100 bucks ....compared to the 450 $ for an Edelbrock 65 mm

 

[4doorcivic16]

b16 and b18 should fit. my frend has a y8 and a b16 tb.

 

[nightryder99]

b16 and b18 should fit. my frend has a y8 and a b16 tb.

the RS and GS are b18?
is it close to 60 -65 mm ? and will i need new intake piping?

 

[4doorcivic16]

not sure .

 

[sohclubkid]

im runnin a JDM H22 tb on my Y8 intake manni

all the motors you listed have interchangeable TB's.

 

[Chris.]

i do beleve this is the second thread on this topic....why the reason for two?

 

[nightryder99]

i do beleve this is the second thread on this topic....why the reason for two?

dunno...it was a thread i forgot about
call the thread police ...we've used an extra 4 kb !!!!!!!!!

 

[nightryder99]

im runnin a JDM H22 tb on my Y8 intake manni

all the motors you listed have interchangeable TB's.

whats the diameter of an h22??

 

[PhntmSk8r]

the RS and GS are b18?
is it close to 60 -65 mm ? and will i need new intake piping?

RS/GS have b18b's
GSR have b18c's

 

[PhntmSk8r]

whats the diameter of an h22??

approx. 2.2", not sure on MM

 

[nightryder99]

1 " = 2.5 cm
2.5 cm = 25 mm
2.2 * 25 = 55 mm

 

[nightryder99]

how big is a d16y8 tb?
i know the gsr is 60 mm ..
if the gs tb is much bigger than my y8's then its worth it for 100 bucks
anybody got info on this??

my manifold can take up to 65 mm without portmatching
but i haven't found any type r tbs yet

 

[nightryder99]

k i found out that the stock d16y8 tb is 58 mm
if i where to install a 60 mm ...i won't make a big difference right?
GSR tb = 60 mm
LS = 58 mm
in need GS tb size...guessing its 58mm

 

[Revolver]

Get a 90mm Q45 throttle body.

 

[nightryder99]

Get a 90mm Q45 throttle body.

lol are u craked.... 90 wtf am i going to do with 90???
whats a Q45?

 

[Revolver]

lol are u craked.... 90 wtf am i going to do with 90???
whats a Q45?

An Infinity. Its a car. The Infinity Q45... They have 90mm throttle bodies... WOOT!

 

[12.8:1 Ls/vtec]

I'm in the way of thinking that older integras have 58 mm tb's, newer models have 60 mm tb's, Gsr's have 62 mm tb, type r's have a 65 mm and I have a 68 mm tb.

 

[sohclubkid]

whats the diameter of an h22??

i think its 60mm... im not to sure, but its a lil bit bigger than the Y8 tb.

 

[silvertuner98]

gsr has a 60mm TB, i know bc i have one on my car
b16 has a 58mm TB, i know bc ive installed multiple
y8/z6 has 56mm, i know bc i had a y8 tb and have done work on z6's

thanks

 

[nightryder99]

An Infinity. Its a car. The Infinity Q45... They have 90mm throttle bodies... WOOT!

oh ok lol it didnt cross my mind you could modify the throttle to that extent