Search results

?*

Jumper the low pressure switch on the harness, bypassing it. Let me know if anything happens. Check for power at compressor. As well as at fan. Also, is this car stock obd0, obd1 converted , etc!

Springfields near Dayton. There's lots of cool parks In Dayton. Also, the Air Force museum is there and it's very cool(and free). Also the car scene is pretty big in Dayton too. I used to live there

Cel shuts right off tho? Or stays on?

Gently heat the crank pulley around the crank.

Std bore?

Christmas is putting things a little behind. But on the good side I got a pretty decent raise at work so I might have more money that I had originally planned to put towards the z6 build.

Shoes drums and rear hardware. Possibly wheel cylinders if they're leaking. It's all cheap

I've always used a punch/10mm headed bolt and hammer. I'd say heat, if that doesn't work. Drill it out.

#firstworldproblems Velcro?

Very nice wheels. Glws

Dizzy o ring, cam seal, vc gasket, head gasket, rear main, oil pan. I think that's everything on that side if the engine.

What issue are you having with the car?

replace thermostat too. Could be sticking closed.

Dip stick tubes over there too

Little bit of an update.... Rebuilt the b7 that was in the car before I put he z6 in. The plan is to throw this motor in, and drive it for the winter with the beast7 again. During that time I'm going to pull the z6 apart, and rebuild it, likely with p29's, a zex 59300, an intake manifold...

Yea, I'm gonna sand it down and prep it better and redo it, possibly do my front bumper, fender, and hood too. Then eventually the rest.

That's a honda thing, you have to hold open one of the handles to lock the drivers door. One of plastic clips was broke at the actuator at the door latch on my sedan, which caused the same issue. Rip the panel off and see what happening or not happening

My fender needed painted, I've never really sprayed with an actual gun. So I decided to give a cheap little project a go. Harbor freight gun and rostoluem paint. First time ever painting with a gun. I didn't prep it for s**t cause I didn't think it would come out half as good as it did. Also...

I've got a b7 I've been wanting to do a little budget high comp p29 build, so that's in the works. Nothing huge but I figure what the hell. New shocks are on the to do list, not 100% sure what I wanna run. Skunk2 sport shocks possibly. I've got black works rear lca's on the car, they were on...