Jcal816 New Member 5+ Year Member Jun 3, 2008 #1 I have a 93 EX Civic and would like to swap in a B18C1 that has an OBD II, will the ECU swap directly into the 93 EX? I was wondering if I needed a different harness. please get back at me
I have a 93 EX Civic and would like to swap in a B18C1 that has an OBD II, will the ECU swap directly into the 93 EX? I was wondering if I needed a different harness. please get back at me
Jeegz Did sum1 say mud?? Registered VIP Registered OG 5+ Year Member 10+ Year Member Jun 3, 2008 #2 i do believe you need a new engine harness since your car is only OBDI.
RaYrAy New Member Registered VIP 5+ Year Member 10+ Year Member Jun 4, 2008 #3 The engine harness will work fine. You 'll have wire the knock sensor separately, and you'll need a conversion harness for the ecu.
The engine harness will work fine. You 'll have wire the knock sensor separately, and you'll need a conversion harness for the ecu.
obracer12 New Member Registered VIP 5+ Year Member Jun 4, 2008 #4 you need a conversion plug, wire in vtec and knock.. its 3 wires.. easy did a b16 swap... same thing... if you've ever picked up a soldering iron your fine
you need a conversion plug, wire in vtec and knock.. its 3 wires.. easy did a b16 swap... same thing... if you've ever picked up a soldering iron your fine
ReSpEcT954 Xclusive Importz 5+ Year Member Jun 6, 2008 #5 as stated before the engine harness is good just get a jumper harness of the internet for like $60 and hook it up!
as stated before the engine harness is good just get a jumper harness of the internet for like $60 and hook it up!