B18C EK3 project

[D-Rex]

Boosted B18C EK3 project

My project for 2007/2008.
I'm still in the stage of planning and ordering/collecting parts.

Project Car

'97 Civic Hatch...... under heavy construction

Some spec's of the project so far...

Car;

'97 Civic EK3 1.5 Vtec-e

Engine;

* JDM B18C GSR spec
* Hasport mounts
* Blox intakemanifold
* Skunk2 Pro Series 68mm throttle body
* Hondata heatshield
* Moroso Dry sump
* Carbon Airbox Virage CC90L (temp.)
* ITG filter (temp.)
* Skunk2 Pro series camgears
* Summit electric fan
* Samco coolant hoses
* Meziere electric water pump
* Setrab oil cooler + Goodridge hoses
* AEM fuel rail
* AEM fuel pressure regulator
* AEM Tru-Power pulley kit
* Spoon Sports Oil filler cap
* Spoon Sports Radiator cap
* Spoon Sports Radiator stay (2x)
* Spoon Sports Reservoir tank cover
* SRR oil catch can
* SRR coolant reservoir
* Skunk2 solenoid cover
* Skunk2 camseal

Turbo Set-up (will be installed later);

*Garrett T4/GT40 "Blowzilla"
*Lovefab spruitstuk. Custom
*2x Tial 44mm wastegates
*Greddy Type R bov
*PWR liquid to air intercooler

Exhaust;

* JCP header (temp.)
* Custom exhaust by HonTEC
* Invidia Test pipe

Drivetrain;

* ITR tranny w/ LSD
* ITR clutch
* Exedy flywheel
* EK9 driveshafts

Suspension;

* KW Variant 3
* Polyurethane bushings
* Suspension Techniques front swaybar
* Suspension Techniques rear swaybar
* Carbing 3 point front upper strutbrace
* SRR aluminium draagarmen achter
* SRR front camber correction kit (front)
* Ingalls camber correction kit (rear)

Brakes;

* Honda S2000 AP1 brakedisks (front)
* Rotora 4 pot caliper (front)
* Honda CTR EP3 brakedisks (rear)
* Honda CTR EP3 calipers (rear)
* EK4 master cilinder
* Brake Lines; Replaced all lines completely with Goodridge stainless steel lines
* Tilton pressure regulator in line to rear brakes.
* Wilwood double brakebalance controllers

Wheels - Tires;

* Work Emotion CR 16”
* Toyo Proxes T1-R 195/45-16
* Buddy Club lug nuts

Exterior;

* 99/00 OEM headlights
* 99/00 OEM subframe
* 99/00 OEM fenders
* 99/00 OEM front bumper
* 99/00 OEM rear bumper
* 99/00 OEM taillights
* OEM EK9 headlights
* OEM EK9 rear spoiler
* OEM EK9 front bumperlip
* OEM EK9 rear bumperlip
* OEM EK9 grill
* OEM EK9 rear badge
* CF hood
* De-locked doorhandles

Interior;

* Gutted interior
* Recaro Pole Position
* EK9 Cluster
* EK9 red carpet
* EK9 pedals
* EK9 shiftboot
* EK9 shiftknob
* Buddy Club shortshifter
* Sparco FIA Quick Release System
* Momo Corse steeringwheel
* Defi Link Control Unit II
* Defi Link Boost Gauge
* Defi Link Fuel Press Gauge
* Defi Link Oil Press Gauge
* Defi Link Oil Temp Gauge
* Defi link Water Temp Gauge
* Defi Link EGT Gauge

The car will be fully built by HonTEC

 

[D-Rex]

A couple of pic's

EK9 stuff...

Badge

Carpet

Cluster

Headlight

Pedals

Some other toys....

Carbing 3 point strut with brake stopper

Skunk2 Pro Series 68mm throttlebody

Moroso dry sump

Comptech header

Meziere electric water pump

Valve cover by nick b16 *thanks*

 

[D-Rex]

The latest additions;

Got some new parts for the EK:

* Toda spec B cams
* Hondata heatshield gasket
* AEM Tru-Power pulley kit
* Apex'i V-AFC II

I'm also planning on putting a full rollcage in the car

 

[el_betiyo]

Damn.....nice, very nice. Can't wait to see the finish product.

 

[daboyu978]

kool

 

[Destroy]

Repost?

 

[D-Rex]

Repost?

It was a part of my topic in the 4th generation section (I also own 2 crx's). Thought I put the built of the EK in the 6th gen. section. So yeah, it's a repost. If that's a problem just lock or delete it.

 

[EK|B]

Looks like a fun project, can't wait to see the finish product.

 

[Genuine Rolla]

looks like you have a good project on your hands. I like the color..!

 

[D-Rex]

looks like you have a good project on your hands. I like the color..!

Thanks! It's not gonna stay that color

 

[MORENO67]

NIce cant wait to see it done..... good luck .....

 

[cole]

ill be watching for updates, are you going to wiretuck / shave the bay? how much was that rear h badge/ whered you get it from?

 

[schutzracing]

why the dry sump?? I know they make a little power but not much.. My friend put one on his v8 drag camaro and it only added like 5hp.. So I really dont see the point.. But its a awsome project cant wait to see it done!

 

[cole]

why the dry sump?? I know they make a little power but not much.. My friend put one on his v8 drag camaro and it only added like 5hp.. So I really dont see the point.. But its a awsome project cant wait to see it done!

to protect your engine from oil starvation

 

[CivicEX13]

where did you get those pedals i want those sooo bad

 

[jon julian]

sick

 

[VTi_ME]

VVV nice

 

[D-Rex]

ill be watching for updates, are you going to wiretuck / shave the bay? how much was that rear h badge/ whered you get it from?

Yes, I want to do a full wiretuck. The car will be stripped down to it's bare shell, so i've got the chance to do it right.
The badge I got from somebody here in the netherlands, but you might be able to find them on ebay. Cost me about $25,-.

why the dry sump?? I know they make a little power but not much.. My friend put one on his v8 drag camaro and it only added like 5hp.. So I really dont see the point.. But its a awsome project cant wait to see it done!

A friend of mine had the dry sump 'laying around' from a cancelled drag project, so we decided to put it in my car. I know it's not gonna make lots of power, it's just a very nice system we just had to install in the car. And it will to protect my engine from oil starvation on trackdays.

where did you get those pedals i want those sooo bad

Ebay


Thank's all for the positive reply's

 

[b20vti]

looks nice project

 

[Jason-]

Looks great!!

-Jason