Brembo, Walbro, OEM part out 98 civic last call..

Status
Not open for further replies.

oc_civic

....................
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
UPDATED THREAD
http://www.clubcivic.com/board/showthread.php?t=180875




1998 Honda Civic EX Being COMPLETELY stripped and sold.
Prices are SOMEWHAT negotiable especially if more than one item is purchased.
LARGE items would prefer face to face sale.
Will ship ANYTHING at buyers expense, but please dont send me out trying to get shipping quotes on large items unless you are a serious buyer, and understand shipping will be costly.
All shipping will be done through UPS, Signature service is typically a little more.
All shipping charges will be actual shipping cost i incur rounded up (shipping is $7.63 you will pay $8.00) NO ridiculous extra charges.
Additional pictures of ANY item can be provided prior to purchase.
All items are fairly and accurately described as best i can describe them.
Ask questions prior to buying, All items are as is, And all sales are final.
If i sell it I list it as sold so if it is NOT listed in sold it is likely still available.

Email: civicpartout@acmfs.com

Brembo Slotted rotors (pair) $50
Used but still life left.. have surface rust but will rub off when used.. will be shipped in original box

Walbro 255lph Fuel Pump $50

Incomplete Dry Nitrous Kit $150
This kit comes with the bottle, bottle brackets, NOS heater, relays and wires, braided line, solenoids, nitrous regulator, mounting plates for solenoids (condition rough), nozzle.
You will need another length of braided line, couple switches, couple fittings, and some wire.

98 Civic DX Cluster $75
Cluster has been converted over to LED (may need to replace a couple bulbs, or install color of your choice)
Cluster has OEM JDM carbon fiber bezel
Cluster has JDM plastic face (this is the face without the maint reset slot)
Top screw holes are in rough condition but cluster mounted fine for me

B18c Bottom End $500
(timing belt failed while coasting the block should be fine)

B18c Head $200
(timing belt failed while coasting condition is unknown)

GSR obd2 ECU $75

Transmission and clutch $700
(shifted fine no grinds)

Benen Tow Hooks $90
front and back

Autometer Gauge Bezel $30

the following items are SOLD and no longer available..

Skunk 2 Lower Tie Bar SOLD

Omni Power Lower Control Arms SOLD
Price Reduced... Two of the bushing need to be replaced... but they are in otherwise good condition..

MOMO Monte Carlo steering wheel, MOMO Hub, AND Quick Release SOLD

OEM Door Speakers With Pods SOLD

Recaros INCLUDING plates brackets for EK SOLD
extremely comfortable two small tears in drivers side (see pictures).
Each seat has TWO adjustment knobs for a total of FOUR adjustment knobs.. ONE of those FOUR does not work.. this means that BOTH seats are still TOTALLY adjustable..

Skunk 2 Battery Tie Down SOLD

JDM Airbag Black Off Tray SOLD

Under hood horn Assembly SOLD

Air conditioning system SOLD

Heat/AC controls with panel and vents Sold

Cigarette lighter and trim panel Sold

Ingalls torque damper SOLD

Apex VAFC (Black Housing) SOLD

Password JDM strut tower bar SOLD

JDM Thin Molding SOLD

Apex N1 Cat back SOLD
Has slight surface rust in some areas but is in good condition overall.

Takata (set price for both) SOLD

Skunk 2 Lug Nuts SOLD
Rough Condition

SI Sway Bar SOLD

AUTOPower Roll Bar SOLD
(Painted Black)

Rims With Tires Rota Slips SOLD
Rims in fair condition tires in EXCELLENT condition
Kumho 205 50 15

99-00 OEM coupe tail lights SOLD

EK9 OEM Honda Headlights SOLD
Includes City Light Sockets And Plug
(Small crack could use refinishing, will post picture of crack)

SIR Fog Lights OEM Honda SOLD
(no cracks or chips will include most of wiring and switch)

Tein SS Suspension SOLD
May have surface rust due to living in the north east
These are now OFF the car and are in good condition.. there is some rust where the paint has chipped slightly, but nothing more than normal wear and tear..

CTR Shift Boot SOLD

Spoon Sports Titanium Shift Knob SOLD

Spoon Kevlar Intake Pipe SOLD

C/F Hood VIS SOLD (pickup Only)
(could use some refinishing)

B&M Short Shifter SOLD

Spoon Mirrors SOLD
(Carbon fiber would be worth refinishing)
(Mirror could use replacing, the coating on the back of the mirror is somewhat rough)


























http://www.acmfs.com/partout/vafchub.jpg

http://www.acmfs.com/partout/tiebar.jpg

http://www.acmfs.com/partout/tiebar2.jpg

http://www.acmfs.com/partout/vafc2.jpg

http://www.acmfs.com/partout/pw1.jpg

http://www.acmfs.com/partout/pw2.jpg

http://www.acmfs.com/partout/pw3.jpg

http://www.acmfs.com/partout/pw4.jpg

http://www.acmfs.com/partout/n1out.jpg

http://www.acmfs.com/partout/ingalls2.jpg

http://www.acmfs.com/partout/ingalls.jpg

http://www.acmfs.com/partout/teinomni.jpg

http://www.acmfs.com/partout/skunk2tie.jpg

http://www.acmfs.com/partout/n1.jpg

http://www.acmfs.com/partout/momo2.jpg

]http://www.acmfs.com/partout/Momo.jpg

http://www.acmfs.com/partout/ctrboot.jpg

http://www.acmfs.com/partout/Hood.jpg

http://www.acmfs.com/partout/spoonmirrors.jpg

http://www.acmfs.com/partout/ctrmolding.jpg

http://www.acmfs.com/partout/ctrmolding2.jpg

http://www.acmfs.com/partout/ctrmolding3.jpg

http://www.acmfs.com/partout/ctrmolding4.jpg

http://www.acmfs.com/partout/boot.jpg

http://www.acmfs.com/partout/rollbar.jpg

http://www.acmfs.com/partout/rollbar2.jpg

http://www.acmfs.com/partout/rota.jpg

http://www.acmfs.com/partout/tire1.jpg

http://www.acmfs.com/partout/tire2.jpg

http://www.acmfs.com/partout/sirfogs.jpg

http://www.acmfs.com/partout/sirfogstanley.jpg

http://www.acmfs.com/partout/Takata.jpg

http://www.acmfs.com/partout/takata2.jpg

http://www.acmfs.com/partout/skunk2tiedown.jpg

http://www.acmfs.com/partout/kevlar3.jpg

http://www.acmfs.com/partout/kevlar2.jpg

http://www.acmfs.com/partout/kevlar.jpg

http://img11.imageshack.us/img11/4442/lugsv.jpg

http://www.acmfs.com/partout/ctr4.jpg

http://www.acmfs.com/partout/ctr1.jpg

http://www.acmfs.com/partout/ctr2.jpg

http://www.acmfs.com/partout/ctr3.jpg

http://img525.imageshack.us/img525/4680/speakerso.jpg

build thread
http://www.clubcivic.com/board/showthread.php?t=123283
 
Last edited:

Evan.

iTrader EVERYthing
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
nice prices, good luck with the part-out :thumbup:
 


00_lsvtec

New Member
5+ Year Member
i want that hood!!! ha. where is perdition at? also have a friend interested in the head
 

oc_civic

....................
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
im in NJ... take the head AND hood for $250...
 

ruff_ridaz99

New Member
Registered VIP
5+ Year Member
10+ Year Member
interested in the apexi cat-back and the just the steering wheel...can i see pictures of the N1 pleases!!
 

Jbuck2KCivic

New Member
Registered VIP
Registered OG
5+ Year Member
Just wondering if you had the stock exhaust laying around somewhere?
 
Status
Not open for further replies.


Top