*Note* I have my build on another forum so im just going to copy and paste what i have so far im not going to put it all on one day but here ya go enjoy *Note*
My goal with this car is is to go 10sec on the track or go over 600+hp and at the end have it looking jdm.
First i'd like to tell you people how i got into the racing scene. My very first car was a 2000 ek coupe 5spd and boosted. At the time i didnt know anything about cars i just got it because it looked clean and simple i was the type of kid that would go to school and if i heard you talk about cars i'd walk away and chill with other people lol. (Now i love cars lol ) Anyways I learned to drive stick on a boosted car fun and scary at the same time lol. The car was boosting at 5lbs crazy to say at the time the car seemed really fast. My dad presented me to a shop CFT (Central Florida Turbo) thats where i got my car tuned after i got it tuned i took it to the shop, ran 15's flat and before i traded her fastest time it ran was 13.8. Ever since that day i've been addicted to the track and took me on to this build. This is how the car looked like before i traded it like a month ago (sadly to say i miss her alot had her for 2 years)
When i first got her
Before i traded her
The reason i had traded it was to get something lighter. Now i got this
This is Everything i have for the motor so far. I been on this for about 2 years. Why so long? (1) Because i spent a good amount of money on my old coupe and not concentrating on my motor and (2) i wasn't sure of what parts to buy so i had CFT help me alot on it!
B16 Head
Skunk2 Pro Series Valves, Springs, Retainers, and Cams Stage 1
Skunk2 Fuel Rail
Edelbrock VictorX Intake manifold
Blox 72mm Throttle body
84mm Cometic Headgasket
ARP Headstuds
GoldenEagle Vtec Conversion Kit
B18b
84mm GoldenEagle Sleeved block
CP Pistons
Manley Turbo tuff rods
Type r oil pump
GoldenEagle Block Girdle
ACL Rod Bearings & Calico Main/Thrust Bearings
GSR Tranny
Wavetrac LSD
CFT Longer 1st Gear
Twin Disc Competition Clutch
Onto the pictures
Wish Me Luck
My goal with this car is is to go 10sec on the track or go over 600+hp and at the end have it looking jdm.
First i'd like to tell you people how i got into the racing scene. My very first car was a 2000 ek coupe 5spd and boosted. At the time i didnt know anything about cars i just got it because it looked clean and simple i was the type of kid that would go to school and if i heard you talk about cars i'd walk away and chill with other people lol. (Now i love cars lol ) Anyways I learned to drive stick on a boosted car fun and scary at the same time lol. The car was boosting at 5lbs crazy to say at the time the car seemed really fast. My dad presented me to a shop CFT (Central Florida Turbo) thats where i got my car tuned after i got it tuned i took it to the shop, ran 15's flat and before i traded her fastest time it ran was 13.8. Ever since that day i've been addicted to the track and took me on to this build. This is how the car looked like before i traded it like a month ago (sadly to say i miss her alot had her for 2 years)
When i first got her
Before i traded her
The reason i had traded it was to get something lighter. Now i got this
This is Everything i have for the motor so far. I been on this for about 2 years. Why so long? (1) Because i spent a good amount of money on my old coupe and not concentrating on my motor and (2) i wasn't sure of what parts to buy so i had CFT help me alot on it!
B16 Head
Skunk2 Pro Series Valves, Springs, Retainers, and Cams Stage 1
Skunk2 Fuel Rail
Edelbrock VictorX Intake manifold
Blox 72mm Throttle body
84mm Cometic Headgasket
ARP Headstuds
GoldenEagle Vtec Conversion Kit
B18b
84mm GoldenEagle Sleeved block
CP Pistons
Manley Turbo tuff rods
Type r oil pump
GoldenEagle Block Girdle
ACL Rod Bearings & Calico Main/Thrust Bearings
GSR Tranny
Wavetrac LSD
CFT Longer 1st Gear
Twin Disc Competition Clutch
Onto the pictures
Wish Me Luck
but it'll get done sooner or later 
