When installing a used tranny, Is it recommended to replace the flywheel?
sacriminal New Member Jun 11, 2007 #1 When installing a used tranny, Is it recommended to replace the flywheel?
jason_guy_yeah New Member Registered VIP 5+ Year Member 10+ Year Member Jun 11, 2007 #2 Depends, if it's got deep grooves in it, chips, .- yes But, otherwise it's recommended to resurface your flywheel.
Depends, if it's got deep grooves in it, chips, .- yes But, otherwise it's recommended to resurface your flywheel.
sacriminal New Member Jun 11, 2007 #3 Is there a "HOW TO" thread on here that shows how to resurface the flywheel?
jason_guy_yeah New Member Registered VIP 5+ Year Member 10+ Year Member Jun 11, 2007 #4 You actualy have to take it to carquest or a machine shop that can do it.
jdog New Member 5+ Year Member 10+ Year Member Jun 11, 2007 #5 just take it too any transmission place they will do it and check it. if you live near a pepboys they can do it also.
just take it too any transmission place they will do it and check it. if you live near a pepboys they can do it also.
henkz0r Unobtanium Member Registered VIP 5+ Year Member 10+ Year Member Jun 11, 2007 #6 If you're keeping the same clutch, do not resurface your flywheel. If you're putting on a new clutch, then definitely get your flywheel resurfaced.
If you're keeping the same clutch, do not resurface your flywheel. If you're putting on a new clutch, then definitely get your flywheel resurfaced.