Who's into car audio: post pics.

lowlife9

New Member
Registered VIP
5+ Year Member
just wondering what you 7th gen guys or gals got going on with there audio setups. my setup.

The biggest Duralast gold top i could stuff under the hood 800cca.
http://img441.imageshack.us/img441/3951/tmpphpffvzcj.jpg
Big three upgrade.
Jenson flip out,Tsunami rca's,wires,distribution blocks,ANL digital fuse holder,ANL fused distribution block,2 fared capacitor. Kenwood kac-7252 amp for subs, Alpine V-power mrp-f450 for components, 51/2 MB QUART front with adjustable cross overs,61/2 MB QUART rear with adjustable cross overs, two 12inch PowerBass subs in a duel ported tuned PowerBass enclosure.
http://img28.imageshack.us/img28/5995/tmpphpdbmcxb.jpg
http://img36.imageshack.us/img36/552/tmpphpljmdjv.jpg
http://img195.imageshack.us/img195/7316/tmpphpqnsiue.jpg
http://img718.imageshack.us/img718/5733/tmpphpmz0m3f.jpg
http://img59.imageshack.us/img59/7098/tmpphpgzhyfw.jpg
 

Motaw

New Member
haha, that set up is frickin awesome.

But what is that contraption you put in the spot where the tweeter was supposed to go?
 


lowlife9

New Member
Registered VIP
5+ Year Member
you mean my mirror adjuster its a VP i dont have power mirrors otherwise o would have installed my tweeters in the sail panels . but no worries my tweeters can swivel.
 

Brian13

New Member
5+ Year Member
My old setup, nothing to impressive, Pioneer Flip out, PS2, a Cap, 2-10" Diamond D3's, and a 800W max amp. Built by me. I took it out last winter, and haven't put it back it, since the radio broke, and I'm back to factory 6-disc
 


lowlife9

New Member
Registered VIP
5+ Year Member
nice diamond audio makes some good stuff i've had some of there components. you should at least get a simple box.
 

oddeb707

R.I.P Stephen Jackson
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
All I got-

Pioneer P3100DVD Double Din w/ 5.8 inch touch screen.

 

lowlife9

New Member
Registered VIP
5+ Year Member
nice im about to sell my flipout and get another one with better sound quality also another really annoying thing is my current one doesn't charge my ipod while its hooked up . i have it wired behind the dash into my glove box so there's no wires i would love to have the ability to just leave it there permanently.
 

Brian13

New Member
5+ Year Member
nice diamond audio makes some good stuff i've had some of there components. you should at least get a simple box.
Simple box??? That's really not my style. I try not to spend my money on pre-made boxes. I could build one for alot less. I have a few ideas brewing, just don't want to spend the money on all the other stuff, new unit, maybe amp, ect ect.
 

moneysaver0007

New Member
1996 civic audio

15 punch p2 custom fiberglass box running off of a 900w rms kenwood
zapco iforce i450
alpine headunit
2 farad capacitor
 

FlipSkater079

New Member
Registered VIP
5+ Year Member
2 12" JL w1v2
500w RMS Kenwood amp

Hey lowlife the big 3 upgrade is pretty easy right?
You should take some pics of it and s**t because I need to do it.


I'll take some pics of my stuff later, only pics I have are from my old setup in my old car.
 

NSZteg

New Member
5+ Year Member
10+ Year Member
Fully active (biamplified) system.

Alpine 7977, left switch on/off for sub amp, right switch cooling fans.


PCX2125 runs the sub, PC4400 runs the rear component set.


JL 12w6v2, PPI PCX 480 runs the front component set.

Precision Power FRX456 electronic crossover.


Diamond Audio Hex components front and rear.


Rears:



eDead'ed the doors.


Optima, and did the Big 3 upgrade.




All installed by ME!
 

Motaw

New Member
Fully active (biamplified) system.

Alpine 7977, left switch on/off for sub amp, right switch cooling fans.

JL 12w6v2, PPI PCX 480 runs the front component set.

Precision Power FRX456 electronic crossover.


Diamond Audio Hex components front and rear.


Rears:



eDead'ed the doors.


Optima, and did the Big 3 upgrade.




All installed by ME!

By far the best setup I haver ever seen. So discreet. And the tweeters in the back seats was a nice addition. I hope you don't mind me stealing your setup within the next month.
 

evilrilla2

New Member
Registered VIP
5+ Year Member
Fully active (biamplified) system.

Alpine 7977, left switch on/off for sub amp, right switch cooling fans.


PCX2125 runs the sub, PC4400 runs the rear component set.


JL 12w6v2, PPI PCX 480 runs the front component set.

Precision Power FRX456 electronic crossover.


Diamond Audio Hex components front and rear.


Rears:



eDead'ed the doors.


Optima, and did the Big 3 upgrade.




All installed by ME!
Digging it!
 


Top