6th gen swap help

[lucasl]

Im going to be getting a b18c from a 1999 honda civic aerodeck and putting into my 1999 1.6lsi coupe, i need to know exactly what i need from the car, the engine is still in the car but it will be taken out and sent to me

The engine is being sold complete with gearbox ECU what else will i need
all engine mounts
manifold
driveshafts
shift linkage
coolant hose to radiator
wiring harness

what else

 

[Sleeper]

Thats all

 

[1999stockaccord]

you may need a little bit of time and a friend to help out

 

[lucasl]

yea i got a mate who's going to help me fit it it should be here by tomorrow, someone told me i needed the ignition barrel and the key so i got that as well, they said because it sends a signal to the ECU and the ECU wouldnt work without it.
but ive been told i can use an OBD1 ECU and wouldnt have this problem?

 

[vandynamics]

so im assuming you have the ( in the states we call) the ex coupe? for the swap into your car you will need to rear 99-00 si block to subframe tourque mount. and the drivers side upper cup mount. along with the axles, transmission, shift linkadge and ecu.

if you can, get the wiring harness with it motor. you dont NEED it, but its much easier to swap the harness in with it. this is somthing ive learned over many years of swapping.