12.8's & dx/vtec's Massive F/S thread

Status
Not open for further replies.

12.8:1 Ls/vtec

IT'S OVER NINE THOUSAND!!
Registered VIP
Registered OG
5+ Year Member
well,all prices here are OBO to start out b/c we are not looking to keep all this stuff b/c we have some count s**t for our cars, but along the way you have things that you find you have no need for and will just sit around and collect dust, some has for some time,but just pm me or dx/vtec with offers b/c some of the s**t is his, and some is mine, but we will take paypal b/c it is easier for everyone. Thanks for looking and all bumps are appreciated.

_H series
-H23 oil pan
-h23 windage tray
-h23 valve cover

_D series-d16y8 starter
-d16y8 oil pan
-d16y8 complete head assembly-sold
-d15b7 intake manifold
-d16y8 pistons and rods still assembled(great condition)-sold-d16y-z "forza"/ebay grounded 8.5mm plug wires in red
-d13b complete engine assy.
-d13b hydraulic tranny(probably same as vx/cx trans)
-d16y8 throttle body(bare)
-d16y8 manual transmission bracket
-d16y7 intake manifold
-P2P ecu 96-98 obd2-a (manual) x 2
-p05 ecu (manual) x 2-cable d15 transmission
-Hydraulic D series shift linkage x 3
-HF manifold w/ t3 turbo and downpipe (VJ14 turbo,some shaft play but manifold and 5 bolt downpipe are okay.
-SCE copper head gasket for d16y-z
-d16y8 upper timing cover
-d15b7 with good cranks and no oil pans(pieced together,1 w/ head other head is off, both have intakes)
-D series flywheel x 3
-Random D series parts(just ask)

_B series
-b18a1 complete engine assy(groove in #2 cylinder but able to be bored)
-b18a1 throttle body
-B18b1 head assy.-b18b1 manual transmission bracket
-b18c1 AEM intake w/ filter
-b18a block style valve cover
-B18c1 distributor cap
-Ls oil pan x 2
-Ls windage tray x 2
-Ls pickup tube x 2
-b18a1 block ( bare but with main caps, just a little surface rust in the cylinders, .25 over will do the trick)
-B series flywheel x2
-B16 sir2 camshafts(OEM)
-94 b18b1 head assembly
-3 ft turbo oil line(braided steel)
-obd 2 manual p75 ecu =Ls ecu-sold-Random LS parts(just ask)
-Ls power steering assy.
-Ls A/c setup(condensor and brackets.[/COLOR]
-b18 used oil pump x 2
-Street Glow gold series red street glow( it is still in good condition)
-A whole lot of random s**t
-Manual pedal assembly
-Master cylinder for clutch
-Integra 94-up struts(all 4)
-civic dx rear spindles and swing arms

Now for another important matter, pics. I will get them upon request so ask about what you want and how much you want it for and pm me. It may take a couple of days to post pics but don't forget to ask any questions that you may have. Thanks for you help. I'm a procrastinating bastard and that is why I don't have pics yet.Updated items will be in the yellow/green color.

Pics of some items.



 

Szady

D-Series Master
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
How much for the Y8 piston/rods? Also, you happen to have a D16 oilpan?
 


k-series

K-Series.com Owner
Registered VIP
5+ Year Member
10+ Year Member
15+ Year Member
How much for the valve cover and do you have pics?

Steve
 

12.8:1 Ls/vtec

IT'S OVER NINE THOUSAND!!
Registered VIP
Registered OG
5+ Year Member
EJ6Civic27 said:
How much for the Y8 piston/rods? Also, you happen to have a D16 oilpan?
$20 and no I don't have an oilpan for a d16 unless for some reason a d15 oilpan will fit it.
 


12.8:1 Ls/vtec

IT'S OVER NINE THOUSAND!!
Registered VIP
Registered OG
5+ Year Member
k-series said:
How much for the valve cover and do you have pics?

Steve
What valve cover? No pics yet but I will get them. and make a price on the cover + shipping(or I'll take it and see how much shipping is)
 

12.8:1 Ls/vtec

IT'S OVER NINE THOUSAND!!
Registered VIP
Registered OG
5+ Year Member
12.8:1 Ls/vtec said:
What valve cover? No pics yet but I will get them. and make a price on the cover + shipping(or I'll take it and see how much shipping is)
Oh I thought you wanted an Ls one. $15 sound good. I tried painting it when I was 16 so it looks like a candy cane where I tried to paint a rising sun. Looks like crap but You are the one who does all the powder coating so I'll go ahead and tell you that it doesn't have any dents or flaws. Make your offer.
 

Szady

D-Series Master
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
How much for the Y8 head, also?
 

12.8:1 Ls/vtec

IT'S OVER NINE THOUSAND!!
Registered VIP
Registered OG
5+ Year Member
b16CIVICSI said:
can you send me pix of the hf manifold, turbo and the downpipe to Redthunder101@msn.com does the turbo have any shaft play and who its made by thanks
Yes sir, Tommorow. It'll be a cell phone pic, but we can take more than one pic for better angles of the item.
 

DX/VTEC

V-TAK ENGAGE!
5+ Year Member
EJ6Civic27 said:
How much for the Y8 head, also?
Just make me an offer, like we said, all this stuff is just sitting around and we are just wanting to get rid of it.......dont forget i also have the ECU to go along with it if you are interested.
 

clover ej6

i r mekanik
Registered VIP
5+ Year Member
Is the complete head everything ill need for a mini me swap or do you mean everything for the head and how much
 

fitbmx1986

speed safely
Registered VIP
5+ Year Member
10+ Year Member
some of your ls parts

doin a ls swap, so i need a OBD 1 Ecu, Altenator and belt and either a header or stock exhaust manifold will do fine, got any of those? thanks man
 

12.8:1 Ls/vtec

IT'S OVER NINE THOUSAND!!
Registered VIP
Registered OG
5+ Year Member
clover ej6 said:
Is the complete head everything ill need for a mini me swap or do you mean everything for the head and how much
The head and all that goes to it:intake manifold, throttle body,vtec soleniod, cam gear, valve cover, upper exhaust manifold, cam and all head internals, dizzy.

Ecu is separate but we have 2 of them.
 

12.8:1 Ls/vtec

IT'S OVER NINE THOUSAND!!
Registered VIP
Registered OG
5+ Year Member
fitbmx1986 said:
doin a ls swap, so i need a OBD 1 Ecu, Altenator and belt and either a header or stock exhaust manifold will do fine, got any of those? thanks man
No obd1 ecu's. I think I have an alternator, and I have 2 exhaust manifolds.
 

12.8:1 Ls/vtec

IT'S OVER NINE THOUSAND!!
Registered VIP
Registered OG
5+ Year Member
I am pretty sure Dx/vtec has an OBD-2 Ls dizzy. Also an obd-0 one if I'm not mistaken.
 

k-series

K-Series.com Owner
Registered VIP
5+ Year Member
10+ Year Member
15+ Year Member
12.8:1 Ls/vtec said:
What valve cover? No pics yet but I will get them. and make a price on the cover + shipping(or I'll take it and see how much shipping is)
h23 valve cover
 
Status
Not open for further replies.


Top