Mclaren
New Member
Hello everyone I am new to Club Civic. Thank you for having me. Any suggestions on my issue are appreciated..
So my issues is I have a type R swap in a ek I had a butchered 99 harness in my 98 civic. I swapped out that for a 98 ex obd2a harness and im running a Jdm P73. Ever since I did this my car doesn't start unless I hit the gas I read the Cel by jumping out the two pin connector. It's reading code 45. To rich or to lean. I'm not a mechanic I don't know how to tell which one it is.
It does seem to surge a bit and when i hit the gas it doesn't always idle back down but sometimes it will.. If anyone could lead me in the right direction it would be greatly appreciated!
So my issues is I have a type R swap in a ek I had a butchered 99 harness in my 98 civic. I swapped out that for a 98 ex obd2a harness and im running a Jdm P73. Ever since I did this my car doesn't start unless I hit the gas I read the Cel by jumping out the two pin connector. It's reading code 45. To rich or to lean. I'm not a mechanic I don't know how to tell which one it is.
It does seem to surge a bit and when i hit the gas it doesn't always idle back down but sometimes it will.. If anyone could lead me in the right direction it would be greatly appreciated!