Green 91's CRX
- Thread starter Steven.
- Start date
- Status
yes sir.
decided to go with that one over the comp. engineering one.
what the hell kinda speeds do you plan on running?!!?
dont know yet, but i plan on Auto X and road race, so i want a stiff chassis.
ill be buying teh ASR 32mm torsion bar when it comes out.
EF Honda EF
Registered User
how are you going to auto x a zc turbo. Auto x is mainly for NA cars that have power the whole time.
you can auto X turbo cars, a friend on mine(a chick at that) had a 220rwhp turbo miata and she auto x with it.
im not goign to do it to win anything, just to have fun
just ordered a piece of pipe, so i can actually start making the roll bar.
took some measurements of where/what i have to cut for it all to fit. wont have to cut much as far as i can tell!
should be fun, need to cut some 12X7" pieces of 1/8 sheet.
need to pick up a Tubing notcher, and a pipe bender, and then i can really get started.
time to actually start welding.
going Thursday and picking up(hopefully) some rear disk brakes for the crx
buy my stuff, support my cars
took some measurements of where/what i have to cut for it all to fit. wont have to cut much as far as i can tell!
should be fun, need to cut some 12X7" pieces of 1/8 sheet.
need to pick up a Tubing notcher, and a pipe bender, and then i can really get started.
time to actually start welding.
going Thursday and picking up(hopefully) some rear disk brakes for the crx
buy my stuff, support my cars
Last edited:
SilentMist
10 psi seems like a dream
Not To flame your thread or go off topic.
But you know what steve you get alot of hater raid in almost all the threads you start man,I just dont understand it man.
Quote on Quote "You Got the Juice Now" Quote on Quote.
But you know what steve you get alot of hater raid in almost all the threads you start man,I just dont understand it man.
Quote on Quote "You Got the Juice Now" Quote on Quote.
WOOT WOOT!
went and spent all my money yesterday lol.
got some good s**t at the junkyard though, was worth sitting in the 90F heat for 3hrs.
pics:
1: Minty CRX SI pass seat.(only need to buy 1 racing seat)
2.CRX Rear Disk brakes!
after that, went to the tool store(harbor fright ftw) and picked up:
horz/vert BANDSAW
Tubing Notcher
and a tubing bender
so i can actually start my roll cage.
rear disk+EX front brakes(10.3" rotors)+SS lines+integra booster and MC+ 40/40 prop valve= mad stoppin power y0
getting all slotted rotors and hawk pads
went and spent all my money yesterday lol.
got some good s**t at the junkyard though, was worth sitting in the 90F heat for 3hrs.
pics:
1: Minty CRX SI pass seat.(only need to buy 1 racing seat)
2.CRX Rear Disk brakes!
after that, went to the tool store(harbor fright ftw) and picked up:
horz/vert BANDSAW
Tubing Notcher
and a tubing bender
so i can actually start my roll cage.
rear disk+EX front brakes(10.3" rotors)+SS lines+integra booster and MC+ 40/40 prop valve= mad stoppin power y0
getting all slotted rotors and hawk pads
Last edited:
they were on my bros 90 hatch, for the york PA meet last year
should of never let bryant buy it>
been off since june 12th, dont get my license back till april of 08
will be cleaner when i am done with it.
seeing how all the interior is going back in, i replaced the front bumper, fixing the rust,all new suspension, 300whp DOHC ZC, better brakes.
Last edited:
- Status